1073609 Phoenix Contact Electrical Wires & Cables

1073609 Product Details

• Design
  Generation 2
• Width
  77 mm (Vehicle charging connector)
• Conductor length
  8 m
• Maximum charging power
  80 kW
• Rated current for signal contacts
  20 A ((A+, A-))
• Temperature monitoring
  2x Pt 1000
• Mating face color
  black
• Housing material
  Plastic
• Material mating face
  Plastic
• Flammability rating
  V0
• Cable resistance
  ≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
• Locking detection
  Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
• Shutdown temperature
  90 °C equivalent to a Pt 1000 value of 1346.5 Ω
• ETIM 6.0
  EC002897
• Type
  DC charging cable
• Affixed logo
  “PHOENIX CONTACT” logo
• Charging standard
  GB/T
• Normative cable length restrictions
  NOTE: Cable management may be required.
• Ambient temperature (storage/transport)
  -40 °C ... 80 °C
• Rated current of power contacts
  80 A
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Housing color
black
Actuating element color
black
Material handle area
Soft plastic
Wiring class
Class 5/6
Outer sheath, material
TPU
Locking current
2 A
Tolerance at the sensor with the recommended measured current
±1K
Temperature range
-50 °C ... 130 °C
ECLASS 11.0
27144705
Standards/regulations
DIN EN 60751
Stripping length
150 mm ±20 mm
Number of power contacts
3 (PE, DC+, DC-)
Type of signal transmission
according to GB/T 27930-2015
Rated voltage for signal contacts
30 V
Insertion force
< 100 N
Color protective cap
black
Actuating lever material
Metal
Material protective cap
Plastic
Wiring standards/regulations
GB/T 33594-2017
Wiring certifications
CQC1105-2015
External sheath, color
black
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
ECLASS 10.0.1
27144705
ECLASS 9.0
27144705
Application
For charging electric vehicles (EV) with direct current (DC)
Height
137.8 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Degree of protection
IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
Rated voltage for power contacts
1000 V DC
Insertion/withdrawal cycles
> 10000
Withdrawal force
< 100 N
Customer variations
On request
Material surface of contacts
Ag
External cable diameter
27 mm ±0.4 mm
Minimum bending radius
135 mm (5 x diameter)
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Recommended measured current
1 mA (1 V at 0°C)
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
Charging mode
Mode 4
Depth
279.4 mm (Vehicle charging connector)
Max. altitude
5000 m (above sea level)
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Note on the connection method
Crimp connection, cannot be disconnected
Design line
Standard
Color handle area
gray
Label
14.1 mm x 44.8 mm (customer logo on request)
Cable structure
3 x 16 mm² + 2 x 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
Type of conductor
straight
Type of sensor
Pt 1000
Temperature coefficient (TCR)
3850 ppm/K
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 7.0
EC002897

Product condition