1073608 Phoenix Contact Electrical Wires & Cables

1073608 Product Details

• Application
  For charging electric vehicles (EV) with direct current (DC)
• Charging standard
  GB/T
• Conductor length
  10 m
• Maximum charging power
  80 kW
• Degree of protection
  IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Rated current for signal contacts
  20 A ((A+, A-))
• Resistor coding
  1000 Ω (between PE and CC1 / PE and CC2)
• Withdrawal force
  < 100 N
• Color handle area
  gray
• Customer variations
  On request
• Material protective cap
  Plastic
• Cable structure
  3 x 16 mm² + 2 x 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
• Affixed logo
  “PHOENIX CONTACT” logo
• Normative cable length restrictions
  NOTE: The cable length exceeds the normative specification of 10 m.
• Stripping length
  150 mm ±20 mm
• Number of power contacts
  3 (PE, DC+, DC-)
• Rated voltage for power contacts
  1000 V DC
• Type of signal transmission
  according to GB/T 27930-2015
• Insertion/withdrawal cycles
  > 10000
• Housing color
  black
Color protective cap
black
Material handle area
Soft plastic
Flammability rating
V0
Wiring class
Class 5/6
Cable resistance
≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C)
Type
DC charging cable
Charging mode
Mode 4
Depth
279.4 mm (Vehicle charging connector)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated current of power contacts
80 A
Rated voltage for signal contacts
30 V
Temperature monitoring
2x Pt 1000
Design line
Standard
Actuating element color
black
Housing material
Plastic
Material mating face
Plastic
Wiring standards/regulations
GB/T 33594-2017
Type of conductor
straight
Minimum bending radius
135 mm (5 x diameter)
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Temperature coefficient (TCR)
3850 ppm/K
ECLASS 11.0
27144705
Design
Generation 2
Height
137.8 mm (Vehicle charging connector)
Ambient temperature (operation)
-30 °C ... 50 °C
Max. altitude
5000 m (above sea level)
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Note on the connection method
Crimp connection, cannot be disconnected
Insertion force
< 100 N
Mating face color
black
Label
14.1 mm x 44.8 mm (customer logo on request)
Actuating lever material
Metal
Material surface of contacts
Ag
Wiring certifications
CQC1105-2015
Outer sheath, material
TPU
Locking current
2 A
Recommended measured current
1 mA (1 V at 0°C)
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ETIM 6.0
EC002897
Standards/regulations
DIN EN 60751
Width
77 mm (Vehicle charging connector)
Temperature range
-50 °C ... 130 °C
ECLASS 10.0.1
27144705
ETIM 7.0
EC002897
External cable diameter
27 mm ±0.4 mm
External sheath, color
black
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Tolerance at the sensor with the recommended measured current
±1K
China RoHS
Environmentally Friendly Use Period = 10;
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Type of sensor
Pt 1000
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ECLASS 9.0
27144705

Product condition