1073604 Phoenix Contact Electrical Wires & Cables

1073604 Product Details

• Type
  DC charging cable
• Standards/regulations
  DIN EN 60751
• Width
  77 mm (Vehicle charging connector)
• Conductor length
  6 m
• Depth
  279.4 mm (Vehicle charging connector)
• Degree of protection
  IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
• Number of power contacts
  3 (PE, DC+, DC-)
• Rated current for signal contacts
  20 A ((A+, A-))
• Insertion/withdrawal cycles
  > 10000
• Design line
  Standard
• Actuating element color
  black
• Application
  For charging electric vehicles (EV) with direct current (DC)
• Height
  137.8 mm (Vehicle charging connector)
• Max. altitude
  5000 m (above sea level)
• Rated voltage for signal contacts
  30 V
• Note on the connection method
  Crimp connection, cannot be disconnected
• Color handle area
  gray
• Label
  14.1 mm x 44.8 mm (customer logo on request)
• Flammability rating
  V0
• Wiring certifications
  CQC1105-2015
Outer sheath, material
TPU
Locking current
2 A
Type of sensor
Pt 1000
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 7.0
EC002897
Affixed logo
“PHOENIX CONTACT” logo
Normative cable length restrictions
NOTE: Cable management may be required.
Stripping length
150 mm ±20 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Number of signal contacts
6 (S+, S-, A+, A-, CC1, CC2)
Type of signal transmission
according to GB/T 27930-2015
Insertion force
< 100 N
Color protective cap
black
Actuating lever material
Metal
Cable structure
2 x 70 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²
External sheath, color
black
Current supply duration
50 ms ... 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)
Tolerance at the sensor with the recommended measured current
±1K
ECLASS 10.0.1
27144705
Charging mode
Mode 4
Ambient temperature (operation)
-30 °C ... 50 °C
Rated current of power contacts
250 A
Resistor coding
1000 Ω (between PE and CC1 / PE and CC2)
Housing color
black
Mating face color
black
Housing material
Plastic
Material mating face
Plastic
Wiring class
Class 5/6
Minimum bending radius
174.5 mm (5 x diameter)
Temperature coefficient (TCR)
3850 ppm/K
Long-term stability (max. R0-Drift)
0.06 % (After 1000 hours at 130°C)
ECLASS 11.0
27144705
Design
Generation 2
Charging standard
GB/T
Maximum charging power
250 kW
Rated voltage for power contacts
1000 V DC
Temperature monitoring
2x Pt 1000
Withdrawal force
< 100 N
Customer variations
On request
Material protective cap
Plastic
Wiring standards/regulations
GB/T 33594-2017
Type of conductor
straight
Cable resistance
≤ 0.000272 Ω/m (based on a power core, at an ambient temperature of 20°C)
Locking detection
Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)
Recommended measured current
1 mA (1 V at 0°C)
Shutdown temperature
90 °C equivalent to a Pt 1000 value of 1346.5 Ω
ETIM 6.0
EC002897
Material handle area
Soft plastic
Material surface of contacts
Ag
External cable diameter
34.9 mm ±0.4 mm
Locking type
Locking option for actuating lever with actuators integrated in the Vehicle Connector
Temperature range
-50 °C ... 130 °C
ECLASS 9.0
27144705

Product condition