1052448 Phoenix Contact Electrical Wires & Cables

1052448 Product Details

• Design
  Generation 1
• Height
  96 mm
• Bore dimensions
  60 mm x 60 mm
• Degree of protection
  IP44 (plugged in)
• Rated current of power contacts
  32 A
• Rated voltage for signal contacts
  30 V AC
• Type
  rear protective cover screw connection
• Note on the connection method
  Crimp connection, cannot be disconnected
• Cable structure
  4 x 0.5 mm²
• Ambient temperature (operation)
  -30 °C ... 50 °C
• Number of phases
  3
• Type of signal transmission
  Pulse width modulation
• Screw connection of a protective cover
  Only rear mounting possible
• Mounting hole diameter
  7.00 mm (ø)
• Typical motor current for locking
  0.2 A
• Max. dwell time with reverse current
  1000 ms
• Reverse current of the motor
  max. 1 A
• ECLASS 10.0.1
  27144706
• Charging standard
  Type 2
• Depth
  76.2 mm
Conductor length
2 m (AC cables)
Type of charging current
AC 3-phase
Rated voltage for power contacts
480 V AC
Insertion/withdrawal cycles
> 10000
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Number of positions of theconnectors
4
Possible power supply range at the motor
9 V ... 16 V
Service life insertion cycles
> 10000 load cycles
Lock recognition
available
ECLASS 9.0
27144706
Application
For charging electric vehicles (EV) with alternating current (AC)
Standards/regulations
IEC 62196-2
Width
75 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Maximum charging power
22 kW
Rated current for signal contacts
2 A
Insertion force
< 100 N (Optimized)
Withdrawal force
< 100 N (Optimized)
Design line
Generation 1
Material surface of contacts
Ag
Operating voltage
12 V (Typical power supply at the motor)
Cable length
1.5 m
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27144706
Affixed logo
“PHOENIX CONTACT” logo
Charging mode
Mode 3, Case B
Type of conductor
Single wires
Max. altitude
5000 m (above sea level)
Number of power contacts
5 (L1, L2, L3, N, PE)
Number of signal contacts
2 (CP, PP)
Possible mounting positions
Rear panel mounting
Housing color
black
Customer variations
On request
Recommended adaptation time
600 ms
Mechanical emergency release
available
China RoHS
Environmentally Friendly Use Period = 10;
ETIM 7.0
EC002898
Mounting position of the locking actuator
Top center
Material
Plastic
Locking type
Locking in the inserted state with a locking mechanism
Maximum voltage for locking detection
30 V
Pause time after entry or exit path
3 s
ETIM 6.0
EC002898

Product condition