1050201 Phoenix Contact Electrical Measuring & Monitoring Instruments

1050201 Product Details

• Depth
  114.5 mm
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Input signal range
  0 Ω ... 50 kΩ
• Sensor input current
  10 µA ... 210 µA (Up to 2x 210 µA with 3-conductor technology)
• Current output signal
  0 mA ... 20 mA
• Supply voltage range
  19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
• No. of channels
  1
• Alignment zero
  ± 5 %
• Interference emission
  EN 61000-6-4
• Color
  gray
• Height
  116 mm
• Altitude
  ≤ 5000 m
• Temperature measuring range
  -200 °C ... 850 °C (Range depending on the sensor type)
• Potentiometer resistance range
  0 Ω ... 50 kΩ
• Measuring range span
  ≥ 50 K
• Nominal supply voltage
  24 V DC
• Stripping length
  8 mm
• Transmission error, typical
  0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
• Housing material
  PA 6.6-FR
• Degree of pollution
  2
IECEx
Ex ec ic IIC T4 Gc
DNV GL-Temperature
B
Identification
2
EMC
B
ECLASS 4.1
27210120
ETIM 3.0
EC001446
UNSPSC 11
39121008
UNSPSC 18.0
41112105
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Rated insulation voltage
300 Vrms
Signal output
Current output
Max. current output signal
≥ 21 mA
Behavior in the event of a sensor error
As per NE 43 or can be freely defined
Conductor cross section AWG
24 ... 16
Status display
Green LED (supply voltage, PWR)
Electromagnetic compatibility
Conformance with EMC directive
Designation
Safety Integrity Level (SIL, IEC 61508)
Standards/regulations
GB 3836.1
Typical deviation from the measuring range final value
1 %
DNV GL-Humidity
B
Certificate
DNV GL TAA00000AG
Temperature
B
ECLASS 10.0.1
27210129
ECLASS 4.0
27210120
ECLASS 6.0
27210120
ETIM 7.0
EC002919
UNSPSC 12.01
39121008
UNSPSC 20.0
41112105
Noise emission
EN 61000-6-4
Ambient temperature (operation)
49 °C
Degree of protection
IP20
Sensor types (RTD) that can be used
Pt, Ni, Cu sensors: 2, 3, 4-wire
Configurable/programmable
Yes
Output ripple (current)
< 15 µAPP
Connection method
Push-in connection
Power consumption
≤ 1 W
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Alignment span
± 5 %
Electrical isolation
375 V (Peak value in accordance with IEC/EN 60079-11)
Conformance
CE-compliant, additionally EN 61326
DNV GL-EMC
B
Humidity
B
Vibration
A
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27210120
ETIM 2.0
EC001446
ETIM 6.0
EC002919
UNSPSC 19.0
41112105
Width
12.5 mm
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Test voltage
2.5 kV AC (50 Hz, 1 min.)
Max. permissible overall conductor resistance
50 Ω (Per cable)
Load/output load current output
≤ 600 Ω
Power dissipation
≤ 0.76 W
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Temperature coefficient, typical
0.01 %/K
Step response (0–99%)
typ. 1 s
Overvoltage category
II
Insulation
Safe isolation in accordance with IEC/EN 61010-1
DNV GL-Vibration
A
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210129
ECLASS 7.0
27210120
ECLASS 9.0
27210129
UNSPSC 6.01
30211506
UNSPSC 13.2
41112105
ATEX
 II 3 G Ex ec ic IIC T4 Gc
Additional text
and EN 61326
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27210120
ETIM 4.0
EC001446
UNSPSC 7.0901
39121008
UNSPSC 21.0
41112105

Product condition