1047496 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  7
• Insulating material
  PA
• Nominal voltage UN
  500 V
• Maximum total current
  41 A
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short-time current
  0.3 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 15
  27.4 mm
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section AWG min.
  24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Nominal current IN
41 A
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Setpoint
5 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 12 0.34 mm² 4 mm²
Connection
Feed-in stage
ETIM 6.0
EC000897
ECLASS 11.0
27141120
Number of levels
1
Color
black
Insulating material group
I
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
19 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
Nominal cross section feed-in
4 mm²
Degree of pollution
3
Maximum load current
41 A (with 6 mm² conductor cross section)
Open side panel
No
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Result of tight fit on support
Test passed
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Shock test result
Test passed
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
21.6 mm
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Value
0.2 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 7.0
EC000897