1044028 Phoenix Contact Data & Networking Devices

1044028 Product Details

• Permissible humidity (storage/transport)
  10 % ... 95 % (non-condensing)
• Transmission physics
  Depending on the SFP module
• Diagnostic functions
  RMON History
• Filter functions
  Quality of Service (8 priority classes)
• PROFINET conformance class
  Conformance-Class B
• Supply voltage
  24 V DC (redundant)
• Maximum conductor length (twisted pair)
  100 m
• Height
  130 mm
• Depth
  115 mm
• Status and diagnostic indicators
  LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (link/activity and speed), PROFINET status LEDs (BF, SF)
• Residual ripple
  3.6 VPP (within the permitted voltage range)
• Housing material
  Polycarbonate fiber reinforced
• Mounting type
  DIN rail
• Connection method
  Push-in spring connection
• Conductor cross section solid max.
  1.5 mm²
• Conducted noise emission
  EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
• Immunity to conducted interference
  EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
• Vibration (storage/transport)
  5g, 150 Hz, in acc. with IEC 60068-2-6
• UL, USA
  UL 60079-0, Ed.6 / UL 60079-7, Ed.5
• IP parameterization
  DHCP-Client
Utilization restriction
Use in potentially explosive areas is not permitted in China.
Air pressure (operation)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
No. of ports
2 (SFP ports)
Transmission length
up to 40 km (Depending on the fiber/SFP module used)
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Management
Web-based management (HTTP/HTTPS)
Additional functions
Transmission of MMS and GOOSE (IEC 61850-8-1)
Port security
MAC-based, RADIUS (IEEE 802.1X)
Supply voltage range
12 V DC ... 57 V DC
Net weight
415.7 g
MTTF
491.44 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Conductor cross section AWG min.
24
Ambient temperature (operation)
-40 °C ... 70 °C
Immunity to burst
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
Noise immunity
EN 61000-6-2
Shock (operation)
30g (EN 60068-2-27)
UL, Canada
CSA C22.2 NO.60079-0, Ed.3 / CSA C22.2 NO.60079-7:16
ECLASS 10.0.1
19170401
ECLASS 7.0
19170106
Width
45 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
Note on the connection method
Auto negotiation and autocrossing
Signal LEDs
Data receive, link status
MAC address table
8k
Time synchronization
SNTP (Simple Network Time Protocol)
Typical current consumption
230 mA (at US = 24 V DC and 25 °C ambient temperature)
Type AX
Book type
Special properties
PROFINET mode preset, PROFINET status LEDs
Conductor cross section flexible max.
1.5 mm²
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Immunity to ESD
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
Free from substances that could impair the application of coating
Yes
IECEx
Ex ec IIC T4 Gc
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27250501
ETIM 4.0
EC000734
UNSPSC 13.2
43222612
UNSPSC 20.0
43222612
Degree of protection
IP20
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Air pressure (storage/transport)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
Interface
SFP module
Transmission speed
100 Mbps (full duplex)
Redundancy
MRP (Media Redundancy Protocol)
Configuration memory
max. 8 GByte (SD card)
PROFINET device function
PROFINET device
Signal contact control voltage
typ. 24 V DC
Cascading depth
Network, linear, and star structure: any
Max. current consumption
1.4 A (US = Min, Tamb = Max, DOI = Max)
Note
Support by phone or on-site (fee is charged)
Conductor cross section flexible min.
0.25 mm²
Conductor cross section AWG max.
16
Interference emission
EN 61000-6-2 EN 61000-6-4 (interference) Class A
Immunity to surge
EN 61000-6-2 EN 61000-4-5 (surge) Criterion B
Shipbuilding approval
Tested in accordance with IEC 60945 and IACS E10
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
ATEX
 II 3 G Ex ec IIC T4 Gc
ECLASS 5.0
19030100
ETIM 7.0
EC000734
ETIM 3.0
EC000734
UNSPSC 12.01
43201410
UNSPSC 19.0
43222612
Noxious gas test
ISA S71.04.2013 G3 Harsh Group A
Current consumption
230 mA
Conductor cross section solid min.
0.25 mm²
Stripping length
9 mm
Immunity to EF
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
Type of test
Free fall in accordance with EN 61131-2
Noise emission
EN 61000-6-3
China RoHS
Environmentally Friendly Use Period = 50 years
UL, USA/Canada
Class I, Div. 2, Groups A, B, C, D T4Class I, Zone 2, IIC T4
ECLASS 5.1
19030100
ECLASS 4.1
27250501
UNSPSC 6.01
43172015
UNSPSC 7.0901
43201404
ECLASS 11.0
19170401
ECLASS 6.0
19170100
ECLASS 9.0
19170106
UNSPSC 11
43172015
UNSPSC 18.0
43222612
ETIM 6.0
EC000734
UNSPSC 21.0
43222612

Product condition