1043414 Phoenix Contact Data & Networking Devices

1043414 Product Details

• ETIM 3.0
  EC000734
• UNSPSC 6.01
  43172015
• UNSPSC 19.0
  43222612
• Depth
  69 mm
• ECLASS 6.0
  19170100
• Width
  128 mm
• No. of ports
  2 (SFP ports)
• ECLASS 7.0
  19170106
• ETIM 4.0
  EC000734
• UNSPSC 12.01
  43201410
• ECLASS 9.0
  19170106
• UNSPSC 7.0901
  43201404
• UNSPSC 18.0
  43222612
• ECLASS 5.0
  19030100
• ETIM 7.0
  EC000734
• UNSPSC 13.2
  43222612
• UNSPSC 21.0
  43222612
• ECLASS 5.1
  19030100
• ECLASS 11.0
  19170401
• ETIM 6.0
  EC000734
UNSPSC 11
43172015
UNSPSC 20.0
43222612
Height
110 mm
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Note on the connection method
Auto negotiation and autocrossing
Management
Web-based management (HTTP/HTTPS)
Configuration memory
max. 8 GByte (SD card)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Air pressure (operation)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
Diagnostic functions
RMON History
PROFINET conformance class
Conformance-Class B
Supply voltage range
19.2 V DC ... 32 V DC
Type AX
Block design
Net weight
650 g
Conductor cross section flexible min.
0.2 mm²
Stripping length
10 mm
Type of test
Free fall in accordance with EN 61131-2
Free from substances that could impair the application of coating
Yes
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27250501
Degree of protection
IP20
Interface
SFP module
Transmission speed
100 Mbps (full duplex)
Filter functions
Quality of Service (8 priority classes)
MAC address table
8k
IP parameterization
DHCP-Client
Time synchronization
SNTP (Simple Network Time Protocol)
Residual ripple
3.6 VPP (within the permitted voltage range)
Max. current consumption
250 mA (US = min, Tamb = max)
Note
Support by phone or on-site (fee is charged)
Connection method
Push-in spring connection
Conductor cross section AWG max.
16
Immunity to EF
EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A
Noise emission
EN 61000-6-4
UL, USA
UL 61010-1, Ed. 3
UL, Canada
CSA C22.2 NO. 61010-1-12, Ed. 3
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 70 °C
Air pressure (storage/transport)
79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating)
Transmission length
up to 40 km (depending on the SFP module used)
Signal LEDs
Data receive, link status
Redundancy
MRP (Media Redundancy Protocol)
PROFINET device function
PROFINET device
Maximum conductor length (twisted pair)
100 m
Mounting type
DIN rail
Material base plate
Die-cast aluminum, corrosion-resistant
Conductor cross section solid max.
1.5 mm²
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Immunity to burst
EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A
Immunity to conducted interference
EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A
Shock (operation)
30g (EN 60068-2-27)
ECLASS 4.0
27250501
Degree of pollution
2
Transmission physics
Depending on the SFP module
Basic functions
Store-and-forward switch, complies with IEEE 802.3
Additional functions
Transmission of MMS and GOOSE (IEC 61850-8-1)
Status and diagnostic indicators
LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link/Activity and Speed)
Supply voltage
24 V DC (redundant)
Typical current consumption
180 mA (at US = 24 V DC and 25 °C ambient temperature)
MTTF
357.82 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Conductor cross section flexible max.
2.5 mm²
Immunity to surge
EN 61000-6-2 EN 61000-4-5 (surge) Criterion A
Conducted noise emission
EN 61000-6-2 EN 61000-6-4 (conducted interference) Class A
Vibration (storage/transport)
5g, 150 Hz, in acc. with IEC 60068-2-6
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
REACh SVHC
Lead 7439-92-1
Signal contact control voltage
typ. 24 V DC
Port security
MAC-based, RADIUS (IEEE 802.1X)
Cascading depth
Network, linear, and star structure: any
Housing material
Stainless steel 1.4301
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Interference emission
EN 61000-6-2 EN 61000-6-4 (interference) Class A
Immunity to ESD
EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B
Noise immunity
EN 61000-6-2
Noxious gas test
ISA S71.04.2013 G3 Harsh Group A
ECLASS 10.0.1
19170401

Product condition