1028075 Phoenix Contact Terminal Blocks

Product Details

• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Number of connections
  2
• Rated surge voltage
  6 kV
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Nominal current IN
  24 A
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Color
violet
Degree of pollution
3
Maximum load current
27 A
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Insulating material
PA
Insulating material group
I
Nominal voltage UN
450 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Height
21.7 mm
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
UNSPSC 18.0
39121410
Tensile test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141121
ETIM 6.0
EC000897
ETIM 3.0
EC000897
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ECLASS 5.1
27141120
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
ECLASS 5.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Short-time current
0.48 kA
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
28.6 mm
Number of levels
1
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Note
When aligning several blocks, the foot elements should be placed in a way that maximum 5 blocks are free-hanging in between. Flange elements should be placed after every 9 blocks.
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Ageing test for screwless modular terminal block temperature cycles
192
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Connection method
Push-in connection
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.1
27141121
UNSPSC 20.0
39121410
Stripping length
8 mm ... 10 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
ETIM 7.0
EC000897
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 7.0901
39121410
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
UNSPSC 11
39121410
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
12
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
UNSPSC 19.0
39121410