1010462 Phoenix Contact Data & Networking Devices
Part#:1010462
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Security appliance, Version for Verizon Wireless (US), 4G mobile network interface, SD card slot, 2 VPN tunnels, firewall for easy configuration, router with NAT/1:1 NAT, 4 port switch
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1010462 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 45 mm
- Number of outputs 3
- Height 130 mm
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Degree of protection IP20 (Manufacturer's declaration)
- Description of the input Digital input
- Designation Corrosive gas test
- Contact discharge ± 6 kV (Test Level 3)
- Signal ± 1 kV (Data line, asymmetrical)
- ETIM 6.0 EC001478
- Utilization restriction Use in potentially explosive areas is not permitted in China.
- Protocols supported TCP/IP, UDP/IP, FTP, HTTP
- Interface description LTE (FDD)
- Web-based management yes
- Number of VPN tunnels 2 (Fixed, Ipsec (IETF standard))
- Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
- Auxiliary protocols ARP, DHCP, PING (ICMP), SNMP V1, SMTP
- Data flow control/protocols Software handshake, Xon/Xoff or hardware handshake RTS/CTS
- Data rate ≤ 150 Mbps (LTE (DL))
- Identification ISA-S71.04-1985 G3 Harsh Group A
- Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
- ECLASS 6.0 19170100
- Depth 114 mm
- Management Web-based management, SNMP
- Frequency range 0.15 MHz ... 80 MHz
- Antenna 50 Ω impedance SMA antenna socket
- Ambient temperature (operation) -40 °C ... 60 °C
- Interface 2 V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
- Current output signal ≤ 125 mA (Short-circuit-proof)
- Current input signal 5 mA
- REACh SVHC Lead 7439-92-1
- File format/coding UART/NRZ: 8 Data, 1/2 Stop, None/Even/Odd Parity
- LTE CAT4
- Voltage output signal 10 V DC ... 30 V DC (depending on the operating voltage)
- Voltage input signal 10 V DC ... 30 V DC
- Standards/regulations EN 61000-6-4
- Comments Criterion B
- ECLASS 11.0 19170406
- ECLASS 7.0 19170103
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Electrical isolation VCC // PE
- ETIM 7.0 EC001478
- SIM interface 1 1.8 volt, 3 volt
- Country support USA
- Serial transmission speed 9.6; 19.2; 38.4; 57.6; 115.2 kbps
- Output name Digital output, resistive load
- Mounting type DIN rail mounting
- MTTF 582 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
- Conductor cross section flexible max. 2.50 mm²
- Stripping length 7 mm
- Connection method D-SUB 9 plug
- Test result Storage: 30g, 11 ms period, half-sine shock pulse
- Test voltage data interface/data interface 1 kV (50 Hz, 1 min., manufacturer's declaration)
- Housing material Metal
- Degree of pollution 2
- Conductor cross section flexible min. 0.20 mm²
- Conductor cross section AWG max. 14
- Interface RS-232
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 19030100
- Wireless licences USA
- Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
- Conductor cross section solid max. 2.50 mm²
- Interface 1 Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
- Transmission length 15 m
- Number of inputs 3
- Test voltage data interface/power supply 1 kV (50 Hz, 1 min., manufacturer's declaration)
- Net weight 630.7 g
- Supply voltage range 11 V DC ... 36 V DC (via pluggable COMBICON screw terminal block)
- Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 2.5 mm²
- No. of ports 4
- Basic functions Router with simplified 2-click firewall and VPN for 2 tunnels (fixed), metal housing, slot for any SD memory card
- ECLASS 5.0 19030100
- ECLASS 9.0 19170103
- Electromagnetic compatibility Conformance with RED Directive 2014/53/EU
- Color silver
- Typical current consumption < 320 mA (24 V DC)
- Conductor cross section solid min. 0.20 mm²
- Conductor cross section AWG min. 24
- Transmission speed 10/100 Mbps (auto negotiation)
- Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
- ECLASS 10.0.1 19170406
- Security functions Supported Supported Supported DES, 3DES, AES-128, -192, -256 ESP tunnel / ESP transport Supported Supported X.509v3 certificates with RSA or PSK MD5, SHA-1 Quick mode, Main mode, PFS RFC 3706 Incoming or outgoing traffic Standard routing, NAT, 1:1-NAT, po
- Max. current consumption 1.8 A (at 11 V DC (incl. 3 x 125 mA for the outputs))
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
