1002946 Phoenix Contact Electrical Wires & Cables

1002946 Product Details

• Charging standard
  Type 2
• Charging mode
  Mode 3, Case B
• Cable structure
  4 x 0.5 mm²
• Max. altitude
  5000 m (above sea level)
• Number of phases
  3
• Type of signal transmission
  Pulse width modulation
• Possible mounting positions
  Rear panel mounting
• Housing color
  black
• Affixed logo
  “PHOENIX CONTACT” logo
• Width
  75 mm
• Type of conductor
  Single wires
• Degree of protection
  IP44 (plugged in)
• Number of power contacts
  5 (L1, L2, L3, N, PE)
• Rated current for signal contacts
  2 A
• Restrictions to mounting position
  Only 0 to 90 degree frontal inclination possible, see figure
• Screw connection of a protective cover
  Only rear mounting possible
• Number of positions of theconnectors
  4
• Operating voltage
  12 V (Typical power supply at the motor)
• Max. dwell time with reverse current
  1000 ms
• ECLASS 10.0.1
  27144706
Type
rear protective cover screw connection
Standards/regulations
IEC 62196-2
Depth
76.2 mm
Ambient temperature (operation)
-30 °C ... 50 °C
Type of charging current
AC 3-phase
Number of signal contacts
2 (CP, PP)
Insertion force
< 100 N (Optimized)
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Customer variations
On request
Possible power supply range at the motor
9 V ... 16 V
Recommended adaptation time
600 ms
Mechanical emergency release
available
ECLASS 9.0
27144706
Application
For charging electric vehicles (EV) with alternating current (AC)
Note on the connection method
Crimp connection, cannot be disconnected
Bore dimensions
60 mm x 60 mm
Maximum charging power
22 kW
Rated current of power contacts
32 A
Rated voltage for signal contacts
30 V AC
Withdrawal force
< 100 N (Optimized)
Mounting hole diameter
7.00 mm (ø)
Locking type
Locking in the inserted state with a locking mechanism
Maximum voltage for locking detection
30 V
Service life insertion cycles
> 10000 load cycles
Lock recognition
available
ECLASS 11.0
27144706
ETIM 7.0
EC002898
Design
Generation 1
Height
96 mm
Conductor length
1.5 m (AC cables)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Rated voltage for power contacts
480 V AC
Insertion/withdrawal cycles
> 10000
Mounting position of the locking actuator
Top center
Design line
Generation 1
Material
Plastic
Reverse current of the motor
max. 1 A
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 10;
Material surface of contacts
Ag
Typical motor current for locking
0.2 A
Pause time after entry or exit path
3 s
Cable length
0.5 m
ETIM 6.0
EC002898

Product condition