8118303 Festo Electric Actuators

8118303 Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
• Work range of logic input
  24 V
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Stroke
  400 mm
• Screw diameter
  12 mm
• Motor type
  Stepper motor
• Spindle type
  Ball screw drive
• Homing
  Fixed stop block positive Reference switch
• Max. speed
  0.22 m/s
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• KC characters
  KC EMC
• Logic input specification
  Based on IEC 61131-2, type 1
• Additional functions
  User interface Integrated end-position sensing
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
Power supply, type of connection
Plug
Number of digital logic inputs
2
Product weight
5054 g
IO-Link®, minimum cycle time
1 ms
Size
60
Piston rod thread
M12x1.25
Type code
EPCS
Piston rod end
External thread
Rotor position sensor measuring principle
Magnetic
Insulation protection class
B
Moving mass at 0 mm stroke
305 g
Spindle nut material
Steel
Display
LED
Parameterization interface
IO-Link® User interface
Logic interface, connection pattern
00992264
Logic interface, connection type
Plug
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
Stroke reserve
0 mm
Max. angle of rotation of the piston rod +/-
1 deg
Rotor position sensor
Absolute encoder, single-turn
Duty cycle
100%
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Certification
RCM compliance mark
Guide value for payload, horizontal
56 kg
Additional moving mass per 10 mm stroke
6.5 g
Input switching logic
NPN (negative switching) PNP (positive switching)
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
DC nominal voltage
24 V
Power supply, number of pins/wires
4
Nominal current
5.3 A
IO-Link®, port class
A
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Mounting position
Any
Design
Electric actuator With integrated drive
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. torque Mz
6.4 Nm
Ambient temperature
0 °C ... 50 °C
Guide value for payload, vertical
18 kg
Type of mounting
With internal thread With accessories
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. cable length
15 m outputs 20 m for IO-Link® operation
Ready status indication
LED
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Reversing backlash
100 µm
Spindle pitch
12 mm/U
Protection against torsion/guide
With plain-bearing guide
Symbol
00997294
Max. acceleration
5 m/s²
Storage temperature
-20 °C ... 60 °C
Max. torque Mx
0 Nm
Max. radial force on actuator shaft
230 N
Additional weight per 10 mm stroke
69 g
Housing material
Wrought aluminum alloy, smooth-anodized
Spindle material
Roller bearing steel
Relative air humidity
0 - 90 % Non-condensing
Max. torque My
6.4 Nm
Max. feed force Fx
375 N
Basic weight with 0 mm stroke
2294 g
Piston rod material
High-alloy stainless steel

Product condition

Related documents 8118303 Specs