8118299 Festo Electric Actuators

8118299 Product Details

• Spindle type
  Ball screw drive
• Display
  LED
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Power supply, type of connection
  Plug
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, connection type
  Plug
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Number of digital logic outputs 24 V DC
  2
• Work range of logic input
  24 V
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Reversing backlash
  100 µm
• Mounting position
  Any
• Piston rod end
  External thread
• Symbol
  00997294
Max. speed
0.22 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Certification
RCM compliance mark
Max. torque Mx
0 Nm
KC characters
KC EMC
Logic input specification
Based on IEC 61131-2, type 1
Parameterization interface
IO-Link® User interface
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, connection pattern
00992264
Number of digital logic inputs
2
Nominal current
5.3 A
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Spindle pitch
12 mm/U
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Ready status indication
LED
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
DC nominal voltage
24 V
Power supply, number of pins/wires
4
Product weight
3674 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
Piston rod thread
M12x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Protection against torsion/guide
With plain-bearing guide
Duty cycle
100%
Storage temperature
-20 °C ... 60 °C
Max. radial force on actuator shaft
230 N
Basic weight with 0 mm stroke
2294 g
Piston rod material
High-alloy stainless steel
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, process data width IN
2 Byte
IO-Link®, port class
A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke
200 mm
Motor type
Stepper motor
Max. acceleration
5 m/s²
Insulation protection class
B
Permissible voltage fluctuations
+/- 15 %
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mz
6.4 Nm
Additional weight per 10 mm stroke
69 g
Housing material
Wrought aluminum alloy, smooth-anodized
Spindle nut material
Steel
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
1 ms
Size
60
Screw diameter
12 mm
Type code
EPCS
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Reference switch
Rotor position sensor
Absolute encoder, single-turn
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Max. torque My
6.4 Nm
Guide value for payload, vertical
18 kg
Moving mass at 0 mm stroke
305 g
Spindle material
Roller bearing steel
Rotor position sensor measuring principle
Magnetic
Repetition accuracy
±0.02 mm
Ambient temperature
0 °C ... 50 °C
Guide value for payload, horizontal
56 kg
Type of mounting
With internal thread With accessories
Max. feed force Fx
375 N
Additional moving mass per 10 mm stroke
6.5 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Product condition

Related documents 8118299 Specs