8118296 Festo Electric Actuators

8118296 Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Parameterization interface
  IO-Link® User interface
• KC characters
  KC EMC
• Power supply, type of connection
  Plug
• Logic interface, connection type
  Plug
• Max. current consumption
  5300 mA
• Ready status indication
  LED
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• DC nominal voltage
  24 V
• Product weight
  2639 g
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, data memory required
  500 byte
• Reversing backlash
  100 µm
• Piston rod end
  External thread
• Spindle type
  Ball screw drive
• Repetition accuracy
  ±0.02 mm
• Certification
  RCM compliance mark
• Display
  LED
Input switching logic
NPN (negative switching) PNP (positive switching)
Characteristics of logic input
Configurable Not galvanically isolated
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, minimum cycle time
1 ms
Stroke
50 mm
Stroke reserve
0 mm
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor
Absolute encoder, single-turn
Corrosion resistance class (CRC)
0 - No corrosion stress
Relative air humidity
0 - 90 % Non-condensing
Guide value for payload, horizontal
56 kg
Basic weight with 0 mm stroke
2294 g
Spindle nut material
Steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Logic input specification
Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Logic interface, connection pattern
00992264
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic inputs
2
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Size
60
Spindle pitch
12 mm/U
Type code
EPCS
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Max. speed
0.22 m/s
Permissible voltage fluctuations
+/- 15 %
Ambient temperature
0 °C ... 50 °C
Max. torque Mx
0 Nm
Additional weight per 10 mm stroke
69 g
Type of mounting
With internal thread With accessories
Spindle material
Roller bearing steel
Power supply, connection pattern
00995989
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Nominal current
5.3 A
IO-Link®, port class
A
IO-Link®, number of ports
1
Piston rod thread
M12x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Design
Electric actuator With integrated drive
Symbol
00997294
Max. acceleration
5 m/s²
Insulation protection class
B
Storage temperature
-20 °C ... 60 °C
Degree of protection
IP40
IO-Link®, SIO mode support
Yes
IO-Link®, protocol version
Device V 1.1
IO-Link®, communication mode
COM3 (230.4 kBd)
Screw diameter
12 mm
Mounting position
Any
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. torque Mz
6.4 Nm
Guide value for payload, vertical
18 kg
Max. torque My
6.4 Nm
Moving mass at 0 mm stroke
305 g
Additional moving mass per 10 mm stroke
6.5 g
Housing material
Wrought aluminum alloy, smooth-anodized
Max. radial force on actuator shaft
230 N
Max. feed force Fx
375 N
Piston rod material
High-alloy stainless steel
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Product condition

Related documents 8118296 Specs