8118295 Festo Electric Actuators

8118295 Product Details

• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Parameterization interface
  IO-Link® User interface
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• DC nominal voltage
  24 V
• Number of digital logic outputs 24 V DC
  2
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, number of ports
  1
• Piston rod thread
  M12x1.25
• Type code
  EPCS
• Spindle type
  Ball screw drive
• Rotor position sensor measuring principle
  Magnetic
• Repetition accuracy
  ±0.02 mm
• Permissible voltage fluctuations
  +/- 15 %
• Max. torque Mx
  0 Nm
• Guide value for payload, horizontal
  120 kg
• Max. feed force Fx
  900 N
• Type of mounting
  With internal thread With accessories
• Display
  LED
• Ready status indication
  LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Product weight
5744 g
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
Reversing backlash
100 µm
Motor type
Stepper motor
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Guide value for payload, vertical
46 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Housing material
Wrought aluminum alloy, smooth-anodized
Input switching logic
NPN (negative switching) PNP (positive switching)
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, connection pattern
00995989
Logic interface, connection type
Plug
Logic interface, number of poles/wires
8
Power supply, number of pins/wires
4
Nominal current
5.3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Spindle pitch
5 mm/U
Piston rod end
External thread
Max. acceleration
1.5 m/s²
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Logic input specification
Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Logic interface, connection pattern
00992264
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, port class
A
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
Size
60
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic inputs
2
Max. current consumption
5300 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke
500 mm
Max. angle of rotation of the piston rod +/-
1 deg
Symbol
00997294
Rotor position sensor
Absolute encoder, single-turn
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Screw diameter
12 mm
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Max. speed
0.09 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Max. torque Mz
6.4 Nm
Additional weight per 10 mm stroke
69 g
Piston rod material
High-alloy stainless steel
Insulation protection class
B
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark
Max. radial force on actuator shaft
230 N
Relative air humidity
0 - 90 % Non-condensing
Max. torque My
6.4 Nm
Moving mass at 0 mm stroke
305 g
Basic weight with 0 mm stroke
2294 g
Additional moving mass per 10 mm stroke
6.5 g
Spindle material
Roller bearing steel
Spindle nut material
Steel

Product condition

Related documents 8118295 Specs