8118287 Festo Electric Actuators

8118287 Product Details

• Display
  LED
• Ready status indication
  LED
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic inputs
  2
• Product weight
  2639 g
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, data memory required
  500 byte
• Piston rod thread
  M12x1.25
• Screw diameter
  12 mm
• Spindle type
  Ball screw drive
• Rotor position sensor
  Absolute encoder, single-turn
• Permissible voltage fluctuations
  +/- 15 %
• Relative air humidity
  0 - 90 % Non-condensing
• Guide value for payload, vertical
  46 kg
• Additional weight per 10 mm stroke
  69 g
• Basic weight with 0 mm stroke
  2294 g
• Spindle nut material
  Steel
• Mounting position
  Any
Max. cable length
15 m outputs 20 m for IO-Link® operation
Logic input specification
Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
Max. current of digital logic outputs
100 mA
DC nominal voltage
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Size
60
Max. angle of rotation of the piston rod +/-
1 deg
Protection against torsion/guide
With plain-bearing guide
Max. speed
0.09 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Max. torque Mz
6.4 Nm
Max. torque Mx
0 Nm
Max. feed force Fx
900 N
Type of mounting
With internal thread With accessories
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Max. current consumption
5300 mA
Nominal current
5.3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, number of ports
1
Stroke reserve
0 mm
Piston rod end
External thread
Symbol
00997294
Rotor position sensor measuring principle
Magnetic
Max. acceleration
1.5 m/s²
Storage temperature
-20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Max. radial force on actuator shaft
230 N
Additional moving mass per 10 mm stroke
6.5 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Input switching logic
NPN (negative switching) PNP (positive switching)
Parameterization interface
IO-Link® User interface
Logic interface, connection pattern
00992264
Power supply, type of connection
Plug
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Stroke
50 mm
Spindle pitch
5 mm/U
Motor type
Stepper motor
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
Insulation protection class
B
Certification
RCM compliance mark
Guide value for payload, horizontal
120 kg
Characteristics of logic input
Configurable Not galvanically isolated
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Logic interface, number of poles/wires
8
Power supply, number of pins/wires
4
IO-Link®, port class
A
IO-Link®, protocol version
Device V 1.1
IO-Link®, communication mode
COM3 (230.4 kBd)
Reversing backlash
100 µm
Type code
EPCS
Design
Electric actuator With integrated drive
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. torque My
6.4 Nm
Moving mass at 0 mm stroke
305 g
Housing material
Wrought aluminum alloy, smooth-anodized
Spindle material
Roller bearing steel

Product condition

Related documents 8118287 Specs