8118285 Festo Electric Actuators

8118285 Product Details

• Spindle nut material
  Steel
• Display
  LED
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, number of pins/wires
  4
• Work range of logic input
  24 V
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, number of ports
  1
• IO-Link®, data memory required
  500 byte
• Type code
  EPCS
• Design
  Electric actuator With integrated drive
• Max. speed
  0.23 m/s
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Additional functions
  User interface Integrated end-position sensing
• Logic interface, connection pattern
  00992264
• Max. current of digital logic outputs
  100 mA
• Number of digital logic inputs
  2
Max. current consumption
3000 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, communication mode
COM3 (230.4 kBd)
Piston rod thread
M10x1.25
Spindle pitch
10 mm/U
Symbol
00997294
Insulation protection class
B
Storage temperature
-20 °C ... 60 °C
Max. torque Mz
2.9 Nm
Guide value for payload, horizontal
40 kg
Moving mass at 0 mm stroke
179 g
Piston rod material
High-alloy stainless steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Parameterization interface
IO-Link® User interface
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Power supply, type of connection
Plug
Product weight
2210 g
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Reversing backlash
100 µm
Mounting position
Any
Spindle type
Ball screw drive
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Max. torque Mx
0 Nm
Max. feed force Fx
250 N
Additional moving mass per 10 mm stroke
4.9 g
Housing material
Wrought aluminum alloy, smooth-anodized
KC characters
KC EMC
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of logic input
Configurable Not galvanically isolated
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Number of digital logic outputs 24 V DC
2
Rotor position sensor resolution
16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
Stroke
250 mm
Stroke reserve
0 mm
Screw diameter
10 mm
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor
Absolute encoder, single-turn
Max. acceleration
5 m/s²
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. torque My
2.9 Nm
Guide value for payload, vertical
13 kg
Type of mounting
With internal thread With accessories
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Ready status indication
LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, connection pattern
00995989
DC nominal voltage
24 V
Logic interface, number of poles/wires
8
Nominal current
3 A
IO-Link®, port class
A
IO-Link®, protocol version
Device V 1.1
Size
45
Max. angle of rotation of the piston rod +/-
1 deg
Motor type
Stepper motor
Homing
Fixed stop block positive Reference switch
Repetition accuracy
±0.02 mm
Relative air humidity
0 - 90 % Non-condensing
Max. radial force on actuator shaft
180 N
Basic weight with 0 mm stroke
1185 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Certification
RCM compliance mark
Additional weight per 10 mm stroke
41 g
Spindle material
Roller bearing steel

Product condition

Related documents 8118285 Specs