8118267 Festo Electric Actuators

8118267 Product Details

• KC characters
  KC EMC
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Additional functions
  User interface Integrated end-position sensing
• Display
  LED
• Parameterization interface
  IO-Link® User interface
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Power supply, connection pattern
  00995989
• Logic interface, connection type
  Plug
• Number of digital logic inputs
  2
• Product weight
  938 g
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Size
  32
• Stroke
  50 mm
• Type code
  EPCS
• Spindle type
  Ball screw drive
• Homing
  Fixed stop block positive Reference switch
• Max. speed
  0.079 m/s
• Insulation protection class
  B
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mz
1.5 Nm
Guide value for payload, horizontal
24 kg
Housing material
Wrought aluminum alloy, smooth-anodized
Spindle material
Roller bearing steel
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, number of poles/wires
8
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Reversing backlash
100 µm
Mounting position
Any
Rotor position sensor
Absolute encoder, single-turn
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. radial force on actuator shaft
75 N
Additional weight per 10 mm stroke
24 g
Type of mounting
With internal thread With accessories
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Input switching logic
NPN (negative switching) PNP (positive switching)
Ready status indication
LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
IO-Link®, minimum cycle time
1 ms
IO-Link®, protocol version
Device V 1.1
IO-Link®, number of ports
1
Screw diameter
8 mm
Max. angle of rotation of the piston rod +/-
1 deg
Design
Electric actuator With integrated drive
Protection against torsion/guide
With plain-bearing guide
Max. acceleration
1.5 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Storage temperature
-20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Basic weight with 0 mm stroke
818 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. cable length
15 m outputs 20 m for IO-Link® operation
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic outputs 24 V DC
2
Max. current consumption
3000 mA
IO-Link®, port class
A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke reserve
0 mm
Spindle pitch
3 mm/U
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. feed force Fx
150 N
Guide value for payload, vertical
12 kg
Moving mass at 0 mm stroke
98 g
Piston rod material
High-alloy stainless steel
Logic interface, connection pattern
00992264
DC nominal voltage
24 V
Nominal current
3 A
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Piston rod thread
M8
Piston rod end
External thread
Symbol
00997294
Repetition accuracy
±0.02 mm
Certification
RCM compliance mark
Max. torque Mx
0 Nm
Max. torque My
1.5 Nm
Additional moving mass per 10 mm stroke
3.3 g
Spindle nut material
Steel

Product condition

Related documents 8118267 Specs