8102167 Festo Electric Actuators
Part#:8102167
Manufacturer:Festo
Alt. Part#:EPCE-TB-60-80-FL-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
About the product: electric cylinder unit EPCE-TB-60-80-FL-ST-M-H1-PLK-AA Effective diameter of drive pinion: 10,18 mm, Size: 60, Stroke: 80 mm, Stroke reserve: 0 mm, Piston rod thread: M10x1,25
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8102167 Festo price in the box on the right side or send a quick quote.
8102167 Product Details
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Ready status indication LED
- Input switching logic PNP (positive switching)
- Characteristics of logic input Configurable Not galvanically isolated
- KC characters KC EMC
- Logic input specification Based on IEC 61131-2, type 1
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Display LED
- Parameterization interface IO-Link® User interface
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Additional functions User interface Integrated end-position sensing
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Number of digital logic inputs 2
- Product weight 1710 g
- IO-Link®, SIO mode support Yes
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, data memory required 500 byte
- Toothed belt material Polychloroprene with glass fiber
- Switching logic at outputs PNP (positive switching)
- Power supply, type of connection Plug
- Max. current of digital logic outputs 100 mA
- Number of digital logic outputs 24 V DC 2
- Max. current consumption 5300 mA
- IO-Link®, port class A
- IO-Link®, protocol version Device V 1.1
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Power supply, connection pattern 00995989
- DC nominal voltage 24 V
- Work range of logic input 24 V
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Toothed belt elongation 0.375 %
- Feed constant 32 mm/U
- Mounting position Any
- Position sensing Motor encoder
- Rotor position sensor Absolute encoder, single-turn
- Logic interface, connection pattern 00992264
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Logic interface, number of poles/wires 8
- Rotor position sensor resolution 16 bit
- IO-Link®, process data width IN 2 Byte
- IO-Link®, number of ports 1
- Drive pinion effective diameter 10.18 mm
- Stroke 80 mm
- Piston rod end External thread
- Motor type Stepper motor
- Max. acceleration 9 m/s²
- Insulation protection class B
- Storage temperature -20 °C ... 60 °C
- Max. torque Mz 1 Nm
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Logic interface, connection type Plug
- Power supply, number of pins/wires 4
- Nominal current 5.3 A
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, communication mode COM3 (230.4 kBd)
- Maintenance interval Life-time lubrication
- Piston rod thread M10x1.25
- Type code EPCE
- Protection class III
- IO-Link®, Connection technology Plug
- Size 60
- Protection against torsion/guide With plain-bearing guide
- Max. speed 0.6 m/s
- Duty cycle 100%
- Relative air humidity 0 - 90 %
- Certification RCM compliance mark
- Guide value for payload, horizontal 10 kg
- Toothed belt pitch 2 mm
- Stroke reserve 0 mm
- Symbol 00997342
- Homing Fixed stop block positive Fixed stop block, negative
- Repetition accuracy ±0.05 mm
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature 0 °C ... 50 °C
- Max. torque My 1 Nm
- Additional weight per 10 mm stroke 45 g
- Design Electric actuator With integrated drive
- Rotor position sensor measuring principle Magnetic
- Permissible voltage fluctuations +/- 15 %
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP40
- Max. torque Mx 0 Nm
- Max. feed force Fx 150 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Additional moving mass per 10 mm stroke 9.75 g
- Impact energy in the end positions 0.016 J
- Reference value, running performance 800 km
- Moving mass at 0 mm stroke 188 g
- Guide value for payload, vertical 5 kg
- Type of mounting With internal thread With accessories
- Housing material Wrought aluminum alloy, anodized
- Basic weight with 0 mm stroke 1350 g
- Cover material Wrought aluminum alloy, anodized
- Piston rod material High-alloy stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8102167 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8102167
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨