8083934 Festo Pneumatic Components

8083934 Product Details

• KC characters
  KC EMC
• Rotor position sensor
  Absolute encoder, single-turn
• Display
  LED
• Logic interface, connection type
  Plug
• Power supply, connection pattern
  00995989
• Power supply, number of pins/wires
  4
• IO-Link®, process data width IN
  2 Byte
• Protection class
  III
• Working stroke
  400 mm
• Motor type
  Stepper motor
• Max. acceleration
  8.5 m/s²
• Max. speed
  1.2 m/s
• Certification
  RCM compliance mark
• Profile material
  Wrought aluminum alloy, anodized
• Drive cover material
  Wrought aluminum alloy, anodized
• Drive pinion effective diameter
  18.46 mm
• Insulation protection class
  B
• Relative air humidity
  0 - 90 %
• Input switching logic
  PNP (positive switching)
• Switching logic at outputs
  PNP (positive switching)
Characteristics of logic input
Configurable Not galvanically isolated
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Max. cable length
15 m outputs 20 m for IO-Link® operation
Logic input specification
Based on IEC 61131-2, type 1
Permissible voltage fluctuations
+/- 15 %
Rotor position sensor measuring principle
Magnetic
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, type of connection
Plug
Guide value for payload, horizontal
2.8 kg
Work range of logic input
24 V
Nominal current
5.3 A
IO-Link®, SIO mode support
Yes
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
Device 1
Size
35
Homing
Fixed stop block positive Fixed stop block, negative
Position sensing
Motor encoder For proximity sensor
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Storage temperature
-20 °C ... 60 °C
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
IO-Link®, Connection technology
Plug
Ready status indication
LED
Number of digital logic inputs
2
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Toothed belt elongation
0.094 %
Guide
Recirculating ball bearing guide
Symbol
00997293
Ambient temperature
0 °C ... 50 °C
Max. force Fz
50 N
Max. feed force Fx
50 N
Product weight
3490 g
Toothed belt clamping component material
Beryllium bronze
Logic interface, connection pattern
00992264
Max. current of digital logic outputs
100 mA
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
Toothed belt pitch
2 mm
Mounting position
Horizontal
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Repetition accuracy
±0.1 mm
2nd moment of area Iy
3770 mm⁴
Reference value, running performance
5000 km
Type code
ELGE
Additional functions
User interface Integrated end-position sensing
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fy
50 N
Additional moving mass per 10 mm stroke
0.31 g
Slide material
Wrought aluminum alloy, anodized
Design
Electromechanical linear axis With integrated drive
Duty cycle
100%
Degree of protection
IP20
2nd moment of area Iz
4190 mm⁴
Feed constant
58 mm/U
Belt pulley material
High-alloy stainless steel
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Toothed belt material
Polychloroprene with glass cord and nylon coating

Product condition

Related documents 8083934 Specs