8083931 Festo Pneumatic Components

8083931 Product Details

• Drive pinion effective diameter
  18.46 mm
• Insulation protection class
  B
• Logic input specification
  Based on IEC 61131-2, type 1
• Relative air humidity
  0 - 90 %
• Input switching logic
  PNP (positive switching)
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Number of digital logic outputs 24 V DC
  2
• Logic interface, number of poles/wires
  8
• IO-Link®, process data width IN
  2 Byte
• KC characters
  KC EMC
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Homing
  Fixed stop block positive Fixed stop block, negative
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection pattern
  00992264
• Guide value for payload, horizontal
  2.8 kg
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, Connection technology
  Plug
• Type code
  ELGE
Symbol
00997293
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Reference value, running performance
5000 km
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Toothed belt clamping component material
Beryllium bronze
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Rotor position sensor
Absolute encoder, single-turn
Rotor position sensor measuring principle
Magnetic
Switching logic at outputs
PNP (positive switching)
Logic interface, connection type
Plug
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Storage temperature
-20 °C ... 60 °C
Rotor position sensor resolution
16 bit
Nominal current
5.3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
Toothed belt pitch
2 mm
Guide
Recirculating ball bearing guide
Max. acceleration
8.5 m/s²
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Ambient temperature
0 °C ... 50 °C
Max. force Fy
50 N
Feed constant
58 mm/U
Profile material
Wrought aluminum alloy, anodized
Toothed belt material
Polychloroprene with glass cord and nylon coating
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Position sensing
Motor encoder For proximity sensor
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, number of pins/wires
4
Work range of logic input
24 V
DC nominal voltage
24 V
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, protocol version
Device V 1.1
Permissible voltage fluctuations
+/- 15 %
Display
LED
Ready status indication
LED
Power supply, connection pattern
00995989
Number of digital logic inputs
2
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
Protection class
III
IO-Link®, process data width OUT
2 Byte
Size
35
Design
Electromechanical linear axis With integrated drive
Duty cycle
100%
Certification
RCM compliance mark
Max. force Fz
50 N
Additional moving mass per 10 mm stroke
0.31 g
Slide material
Wrought aluminum alloy, anodized
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
Device 1
Working stroke
100 mm
Toothed belt elongation
0.094 %
Additional functions
User interface Integrated end-position sensing
Repetition accuracy
±0.1 mm
Degree of protection
IP20
2nd moment of area Iz
4190 mm⁴
Product weight
2740 g
Drive cover material
Wrought aluminum alloy, anodized
IO-Link®, data memory required
500 byte
Mounting position
Horizontal
Motor type
Stepper motor
Max. speed
0.72 m/s
2nd moment of area Iy
3770 mm⁴
Max. feed force Fx
50 N
Belt pulley material
High-alloy stainless steel

Product condition

Related documents 8083931 Specs