8083801 Festo Electric Actuators

8083801 Product Details

• KC characters
  KC EMC
• Switching logic at outputs
  PNP (positive switching)
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Rotor position sensor
  Absolute encoder, single-turn
• Ready status indication
  LED
• Permissible voltage fluctuations
  +/- 15 %
• Power supply, connection pattern
  00995989
• DC nominal voltage
  24 V
• Logic input specification
  Based on IEC 61131-2, type 1
• Input switching logic
  PNP (positive switching)
• Logic interface, connection pattern
  00992264
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, number of pins/wires
  4
• Max. current of digital logic outputs
  100 mA
• Additional functions
  User interface Integrated end-position sensing
• Insulation protection class
  B
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Relative air humidity
  0 - 90 %
• Parameterization interface
  IO-Link® User interface
• Rotor position sensor measuring principle
  Magnetic
Power supply, type of connection
Plug
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Characteristics of logic input
Configurable Not galvanically isolated
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection type
Plug
Number of digital logic inputs
2
Max. current consumption
3000 mA
IO-Link®, number of ports
1
IO-Link®, service data contents IN
32 bit force 32 bit speed
Display
LED
Max. cable length
15 m outputs 20 m for IO-Link® operation
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, number of poles/wires
8
Storage temperature
-20 °C ... 60 °C
Work range of logic input
24 V
Number of digital logic outputs 24 V DC
2
Rotor position sensor resolution
16 bit
Nominal current
3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Screw diameter
8 mm
Type code
EGSS
Symbol
00997294
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fy
991 N
Guide value for payload, horizontal
2 kg
IO-Link®, Connection technology
Plug
IO-Link®, port class
A
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data width IN
2 Byte
IO-Link®, process data width OUT
2 Byte
Working stroke
25 mm
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
IO-Link®, SIO mode support
Yes
Reversing backlash
150 µm
Size
32
Stroke reserve
0 mm
Motor type
Stepper motor
Position sensing
Motor encoder For proximity sensor
Degree of protection
IP40
Dynamic basic load rating, ball screw drive
2000 N
Max. feed force Fx
60 N
Linear guide statistical basic load rating
3880 N
IO-Link®, data memory required
500 byte
Spindle pitch
8 mm/U
Mounting position
Any
Spindle type
Ball screw drive
Repetition accuracy
±0.015 mm
Ambient temperature
0 °C ... 50 °C
Linear guide dynamic basic load rating
2135 N
Max. force Fz
991 N
Max. radial force on actuator shaft
140 N
Design
Electrical mini-slide With integrated drive
Homing
Fixed stop block positive Reference switch
Max. speed
0.19 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Guide
Recirculating ball bearing guide
Max. acceleration
5 m/s²
Certification
RCM compliance mark
Max. torque Mx
3.4 Nm
Max. torque Mz
3.17 Nm
Guide value for payload, vertical
2 kg
Feed constant
8 mm/U
Reference value, running performance
5000 km
Additional moving mass per 10 mm stroke
12 g
Fixed bearing dynamic basic load rating
3795 N
Max. torque My
3.17 Nm
Ball screw drive statistical basic load rating
3700 N
Moving mass at 0 mm stroke
149 g
Type of mounting
With internal thread With cylindrical pin
Guide rail material
Roller bearing steel
Maintenance interval
Life-time lubrication
Basic weight with 0 mm stroke
924 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Statistical fixed bearing load rating
1792 N
Additional weight per 10 mm stroke
30 g
Product weight
999 g
Slide carriage material
Roller bearing steel
Housing material
Wrought aluminum alloy, anodized
Spindle material
Roller bearing steel
Material of yoke plate
Wrought aluminum alloy, anodized
Piston rod material
High-alloy stainless steel
Spindle nut material
Roller bearing steel
Slide material
Wrought aluminum alloy, anodized

Product condition

Related documents 8083801 Specs