8083720 Festo Electric Actuators

8083720 Product Details

• KC characters
  KC EMC
• Additional functions
  User interface Integrated end-position sensing
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Insulation protection class
  B
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic interface, connection pattern
  00992264
• Number of digital logic inputs
  2
• Switching logic at outputs
  PNP (positive switching)
• Relative air humidity
  0 - 90 %
• Logic input specification
  Based on IEC 61131-2, type 1
• Input switching logic
  PNP (positive switching)
• Power supply, connection pattern
  00995989
• Number of digital logic outputs 24 V DC
  2
• Max. current of digital logic outputs
  100 mA
• Work range of logic input
  24 V
• IO-Link®, number of ports
  1
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• Reversing backlash
  150 µm
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
Parameterization interface
IO-Link® User interface
Display
LED
Logic interface, connection type
Plug
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
Working stroke
150 mm
Spindle pitch
12 mm/U
Guide
Recirculating ball bearing guide
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Rotor position sensor
Absolute encoder, single-turn
Characteristics of logic input
Configurable Not galvanically isolated
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, number of poles/wires
8
IO-Link®, Connection technology
Plug
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, process data width IN
2 Byte
IO-Link®, SIO mode support
Yes
Size
60
Screw diameter
12 mm
Design
Electrical mini-slide With integrated drive
Spindle type
Ball screw drive
Max. speed
0.24 m/s
Ambient temperature
0 °C ... 50 °C
Max. force Fy
4937 N
Max. torque My
30 Nm
Guide value for payload, vertical
10 kg
Statistical fixed bearing load rating
7000 N
Ready status indication
LED
Rotor position sensor measuring principle
Magnetic
Permissible voltage fluctuations
+/- 15 %
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
Protection class
III
Stroke reserve
0 mm
Mounting position
Any
Symbol
00997294
Position sensing
Motor encoder For proximity sensor
Degree of protection
IP40
Fixed bearing dynamic basic load rating
13321 N
Max. force Fz
4937 N
Max. feed force Fx
250 N
Ball screw drive statistical basic load rating
8500 N
Reference value, running performance
5000 km
Additional weight per 10 mm stroke
95 g
Material of yoke plate
Wrought aluminum alloy, anodized
Spindle material
Roller bearing steel
Storage temperature
-20 °C ... 60 °C
Nominal current
5.3 A
IO-Link®, data memory required
500 byte
Type code
EGSS
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
Repetition accuracy
±0.015 mm
Linear guide dynamic basic load rating
13400 N
Max. torque Mx
20 Nm
Linear guide statistical basic load rating
26900 N
Moving mass at 0 mm stroke
675 g
Type of mounting
With internal thread With cylindrical pin
Slide material
Wrought aluminum alloy, anodized
Motor type
Stepper motor
Max. acceleration
5 m/s²
Corrosion resistance class (CRC)
0 - No corrosion stress
Dynamic basic load rating, ball screw drive
4600 N
Guide value for payload, horizontal
10 kg
Feed constant
12 mm/U
Basic weight with 0 mm stroke
2735 g
Guide rail material
Roller bearing steel
Housing material
Wrought aluminum alloy, anodized
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. torque Mz
30 Nm
Max. radial force on actuator shaft
420 N
Maintenance interval
Life-time lubrication
Additional moving mass per 10 mm stroke
40 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Roller bearing steel
Product weight
4160 g
Slide carriage material
Roller bearing steel
Piston rod material
High-alloy stainless steel

Product condition

Related documents 8083720 Specs