8083719 Festo Electric Actuators

8083719 Product Details

• KC characters
  KC EMC
• Switching logic at outputs
  PNP (positive switching)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic interface, connection pattern
  00992264
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• DC nominal voltage
  24 V
• Nominal current
  5.3 A
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, SIO mode support
  Yes
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Parameterization interface
  IO-Link® User interface
• Display
  LED
• Permissible voltage fluctuations
  +/- 15 %
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Insulation protection class
  B
• Relative air humidity
  0 - 90 %
• Logic input specification
  Based on IEC 61131-2, type 1
• Input switching logic
  PNP (positive switching)
Rotor position sensor measuring principle
Magnetic
Number of digital logic inputs
2
Additional functions
User interface Integrated end-position sensing
Rotor position sensor
Absolute encoder, single-turn
Characteristics of logic input
Configurable Not galvanically isolated
Ready status indication
LED
Logic interface, connection type
Plug
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Max. current of digital logic outputs
100 mA
IO-Link®, Connection technology
Plug
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Spindle pitch
12 mm/U
Design
Electrical mini-slide With integrated drive
Max. speed
0.24 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Fixed bearing dynamic basic load rating
13321 N
Max. torque Mz
30 Nm
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
IO-Link®, protocol version
Device V 1.1
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data width OUT
2 Byte
Reversing backlash
150 µm
Power supply, connection pattern
00995989
Logic interface, number of poles/wires
8
Storage temperature
-20 °C ... 60 °C
IO-Link®, number of ports
1
IO-Link®, port class
A
Protection class
III
Max. current consumption
5300 mA
Work range of logic input
24 V
IO-Link®, data memory required
500 byte
Working stroke
125 mm
Mounting position
Any
Spindle type
Ball screw drive
Max. acceleration
5 m/s²
Ambient temperature
0 °C ... 50 °C
Dynamic basic load rating, ball screw drive
4600 N
Max. torque My
30 Nm
Feed constant
12 mm/U
Moving mass at 0 mm stroke
675 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
Position sensing
Motor encoder For proximity sensor
Duty cycle
100%
Certification
RCM compliance mark
Size
60
Screw diameter
12 mm
Motor type
Stepper motor
Symbol
00997294
Degree of protection
IP40
Max. force Fz
4937 N
Max. radial force on actuator shaft
420 N
Ball screw drive statistical basic load rating
8500 N
Basic weight with 0 mm stroke
2735 g
Type of mounting
With internal thread With cylindrical pin
Piston rod material
High-alloy stainless steel
Type code
EGSS
Homing
Fixed stop block positive Reference switch
Repetition accuracy
±0.015 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Linear guide dynamic basic load rating
13400 N
Max. force Fy
4937 N
Max. feed force Fx
250 N
Linear guide statistical basic load rating
26900 N
Maintenance interval
Life-time lubrication
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Material of yoke plate
Wrought aluminum alloy, anodized
Max. torque Mx
20 Nm
Guide value for payload, horizontal
10 kg
Reference value, running performance
5000 km
Product weight
3922 g
Slide carriage material
Roller bearing steel
Spindle material
Roller bearing steel
Guide value for payload, vertical
10 kg
Statistical fixed bearing load rating
7000 N
Additional weight per 10 mm stroke
95 g
Housing material
Wrought aluminum alloy, anodized
Additional moving mass per 10 mm stroke
40 g
Guide rail material
Roller bearing steel
Slide material
Wrought aluminum alloy, anodized
Spindle nut material
Roller bearing steel

Product condition

Related documents 8083719 Specs