8083671 Festo Electric Actuators

8083671 Product Details

• Drive pinion effective diameter
  19.1 mm
• Rotor position sensor
  Absolute encoder, single-turn
• Homing
  Fixed stop block positive Fixed stop block, negative
• Display
  LED
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection pattern
  00995989
• Number of digital logic outputs 24 V DC
  2
• Max. current of digital logic outputs
  100 mA
• Work range of logic input
  24 V
• IO-Link®, SIO mode support
  Yes
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, Connection technology
  Plug
• Stroke reserve
  0 mm
• Guide
  Recirculating ball bearing guide
• Symbol
  00997293
• Duty cycle
  100%
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Max. torque Mx
  5.5 Nm
• Slide weight
  55 g
• Drive cover material
  Die cast aluminum, painted
Guide rail material
Tempered steel
KC characters
KC EMC
Insulation protection class
B
Relative air humidity
0 - 90 %
Rotor position sensor measuring principle
Magnetic
Ready status indication
LED
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, number of pins/wires
4
Nominal current
5.3 A
IO-Link®, service data contents IN
32 bit force 32 bit speed
Toothed belt pitch
2 mm
Mounting position
Horizontal
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Degree of protection
IP40
2nd moment of area Iz
170000 mm⁴
Max. torque Mz
4.7 Nm
Moving mass
169 g
Material of end caps
Die cast aluminum, painted
Slide carriage material
Tempered steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Max. cable length
15 m outputs 20 m for IO-Link® operation
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Logic interface, connection type
Plug
Number of digital logic inputs
2
Guide value for payload, horizontal
2.5 kg
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Protection class
III
IO-Link®, data memory required
500 byte
Toothed belt elongation
0.187 %
Design
Electromechanical linear axis With integrated drive
Additional functions
User interface Integrated end-position sensing
Ambient temperature
0 °C ... 50 °C
Max. force Fz
600 N
Max. feed force Fx
75 N
Moving mass at 0 mm stroke
169 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Toothed belt material
Polychloroprene with glass fiber
Permissible voltage fluctuations
+/- 15 %
Position sensing
Motor encoder For proximity sensor
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Power supply, type of connection
Plug
DC nominal voltage
24 V
Storage temperature
-20 °C ... 60 °C
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
IO-Link®, port class
A
Working stroke
1200 mm
Motor type
Stepper motor
Repetition accuracy
±0.1 mm
Certification
RCM compliance mark
Max. force Fy
300 N
Feed constant
60 mm/U
Product weight
4550 g
Cover strip material
Stainless steel strip
Belt pulley material
High-alloy stainless steel
Logic input specification
Based on IEC 61131-2, type 1
Parameterization interface
IO-Link® User interface
Input switching logic
PNP (positive switching)
Switching logic at outputs
PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
Max. current consumption
5300 mA
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, communication mode
COM3 (230.4 kBd)
Size
45
Type code
ELGS
Max. acceleration
6 m/s²
Max. speed
1.2 m/s
2nd moment of area Iy
140000 mm⁴
Max. torque My
4.7 Nm
Torsion moment of inertia It
8500 mm⁴
Profile material
Wrought aluminum alloy, anodized
Slide material
Die-cast aluminum

Product condition

Related documents 8083671 Specs