8083572 Festo Electric Actuators
Part#:8083572
Manufacturer:Festo
Alt. Part#:ELGS-TB-KF-60-500-ST-M-H1-PLK-AA
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: toothed belt axis unit ELGS-TB-KF-60-500-ST-M-H1-PLK-AA Effective diameter of drive pinion: 24,83 mm, Working stroke: 500 mm, Size: 60, Stroke reserve: 0 mm, Toothed-belt stretch: 0,124 %
About the manufacturer: For more than 40 years in the United States and 80 years globally, Festo Corp. has been a positive force for manufacturers. The company's passion is automation & intelligent automation solutions that transform the way people work and the way companies com
Check out the 8083572 Festo price in the box on the right side or send a quick quote.
8083572 Product Details
- Drive pinion effective diameter 24.83 mm
- Logic input specification Based on IEC 61131-2, type 1
- Rotor position sensor Absolute encoder, single-turn
- Relative air humidity 0 - 90 %
- Homing Fixed stop block positive Fixed stop block, negative
- Input switching logic PNP (positive switching)
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Logic interface, connection type Plug
- KC characters KC EMC
- Insulation protection class B
- Permissible voltage fluctuations +/- 15 %
- Rotor position sensor measuring principle Magnetic
- Switching logic at outputs PNP (positive switching)
- Power supply, connection pattern 00995989
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Parameterization interface IO-Link® User interface
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Display LED
- Characteristics of logic input Configurable Not galvanically isolated
- Logic interface, connection pattern 00992264
- Logic interface, number of poles/wires 8
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, number of ports 1
- Stroke reserve 0 mm
- Mounting position Horizontal
- Degree of protection IP40
- Max. force Fy 600 N
- Feed constant 78 mm/U
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Ready status indication LED
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Number of digital logic outputs 24 V DC 2
- Storage temperature -20 °C ... 60 °C
- IO-Link®, process data width IN 2 Byte
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, data memory required 500 byte
- Size 60
- Type code ELGS
- Symbol 00997293
- Max. acceleration 6 m/s²
- Position sensing Motor encoder For proximity sensor
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Number of digital logic inputs 2
- Power supply, number of pins/wires 4
- Nominal current 5.3 A
- IO-Link®, communication mode COM3 (230.4 kBd)
- IO-Link®, protocol version Device V 1.1
- Working stroke 500 mm
- Power supply, type of connection Plug
- Max. current of digital logic outputs 100 mA
- DC nominal voltage 24 V
- Max. current consumption 5300 mA
- IO-Link®, SIO mode support Yes
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, Connection technology Plug
- Guide value for payload, horizontal 4 kg
- Work range of logic input 24 V
- Rotor position sensor resolution 16 bit
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Protection class III
- IO-Link®, port class A
- Toothed belt elongation 0.124 %
- Guide Recirculating ball bearing guide
- Motor type Stepper motor
- Max. speed 1.3 m/s
- Additional functions User interface Integrated end-position sensing
- 2nd moment of area Iz 542000 mm⁴
- Toothed belt pitch 3 mm
- Design Electromechanical linear axis With integrated drive
- Temperature monitoring Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
- Repetition accuracy ±0.1 mm
- Ambient temperature 0 °C ... 50 °C
- Moving mass 482 g
- Duty cycle 100%
- Certification RCM compliance mark
- Max. torque Mx 29.1 Nm
- Torsion moment of inertia It 29800 mm⁴
- Moving mass at 0 mm stroke 482 g
- Profile material Wrought aluminum alloy, anodized
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- 2nd moment of area Iy 441000 mm⁴
- Max. force Fz 1800 N
- Max. torque My 31.8 Nm
- Max. torque Mz 31.8 Nm
- Material of end caps Die cast aluminum, painted
- Slide carriage material Tempered steel
- Max. feed force Fx 65 N
- Product weight 5105 g
- Drive cover material Die cast aluminum, painted
- Belt pulley material High-alloy stainless steel
- Slide weight 139 g
- Cover strip material Stainless steel strip
- Slide material Die-cast aluminum
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Guide rail material Tempered steel
- Toothed belt material Polychloroprene with glass fiber
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8083572 Specs
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨