8083472 Festo Electric Actuators

8083472 Product Details

• Insulation protection class
  B
• Parameterization interface
  IO-Link® User interface
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Position sensing
  Motor encoder For proximity sensor
• KC characters
  KC EMC
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Permissible voltage fluctuations
  +/- 15 %
• Rotor position sensor measuring principle
  Magnetic
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, type of connection
  Plug
• Power supply, number of pins/wires
  4
• Nominal current
  3 A
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• Protection class
  III
• Size
  45
• Rotor position sensor
  Absolute encoder, single-turn
• Input switching logic
  PNP (positive switching)
• DC nominal voltage
  24 V
Storage temperature
-20 °C ... 60 °C
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
IO-Link®, data memory required
500 byte
Type code
ELGS
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Max. acceleration
5 m/s²
Duty cycle
100%
2nd moment of area Iz
170000 mm⁴
Fz with theoretical service life of 100 km (from a guide perspective only)
2208 N
Logic input specification
Based on IEC 61131-2, type 1
Homing
Fixed stop block positive Fixed stop block, negative
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Logic interface, connection type
Plug
Power supply, connection pattern
00995989
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
IO-Link®, minimum cycle time
1 ms
IO-Link®, number of ports
1
IO-Link®, Connection technology
Plug
Spindle pitch
10 mm/U
Mounting position
Any
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Relative air humidity
0 - 90 %
Display
LED
Ready status indication
LED
Logic interface, connection pattern
00992264
Guide value for payload, vertical
5 kg
Number of digital logic inputs
2
Rotor position sensor resolution
16 bit
Max. current consumption
3000 mA
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
Working stroke
300 mm
Screw diameter
10 mm
Motor type
Stepper motor
Spindle type
Ball screw drive
Switching logic at outputs
PNP (positive switching)
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Guide value for payload, horizontal
10 kg
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
Stroke reserve
0 mm
Certification
RCM compliance mark
Guide
Recirculating ball bearing guide
Symbol
00997292
Repetition accuracy
±0.015 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fz
600 N
My with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Feed constant
10 mm/U
Product weight
2434 g
Drive cover material
Die cast aluminum, painted
Additional functions
User interface Integrated end-position sensing
Ambient temperature
0 °C ... 50 °C
Max. force Fy
300 N
Max. torque Mx
5.5 Nm
Mx with theoretical service life of 100 km (from a guide perspective only)
20 Nm
Torsion moment of inertia It
8500 mm⁴
Moving mass
220 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide material
Die-cast aluminum
Max. speed
0.25 m/s
Degree of protection
IP40
Max. torque My
4.7 Nm
Max. torque Mz
4.7 Nm
Material of end caps
Die cast aluminum, painted
Profile material
Wrought aluminum alloy, anodized
Spindle material
Steel
2nd moment of area Iy
140000 mm⁴
Max. feed force Fx
100 N
Static deflection (load at standstill)
0.1 % of axis length
Guide rail material
Steel
Slide carriage material
Steel
Fy with theoretical service life of 100 km (from a guide perspective only)
1104 N
Mz with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Cover strip material
High-alloy stainless steel
Spindle nut material
Steel

Product condition

Related documents 8083472 Specs