8083427 Festo Electric Actuators

8083427 Product Details

• Relative air humidity
  0 - 90 %
• Permissible voltage fluctuations
  +/- 15 %
• Position sensing
  Motor encoder For proximity sensor
• Switching logic at outputs
  PNP (positive switching)
• Logic interface, connection pattern
  00992264
• Power supply, number of pins/wires
  4
• Logic interface, number of poles/wires
  8
• DC nominal voltage
  24 V
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, protocol version
  Device V 1.1
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Rotor position sensor measuring principle
  Magnetic
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection type
  Plug
• Power supply, connection pattern
  00995989
• Number of digital logic inputs
  2
• Storage temperature
  -20 °C ... 60 °C
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
Protection class
III
Stroke reserve
0 mm
Type code
ELGS
Motor type
Stepper motor
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Degree of protection
IP40
2nd moment of area Iy
38000 mm⁴
Max. torque Mx
1.3 Nm
KC characters
KC EMC
Homing
Fixed stop block positive Fixed stop block, negative
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, type of connection
Plug
Guide value for payload, vertical
2 kg
Rotor position sensor resolution
16 bit
IO-Link®, process data width IN
2 Byte
IO-Link®, port class
A
Guide
Recirculating ball bearing guide
Symbol
00997292
Additional functions
User interface Integrated end-position sensing
Max. speed
0.18 m/s
Certification
RCM compliance mark
Fz with theoretical service life of 100 km (from a guide perspective only)
1104 N
Max. torque Mz
1.1 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Material of end caps
Die cast aluminum, painted
Cover strip material
High-alloy stainless steel
Spindle nut material
Steel
Logic input specification
Based on IEC 61131-2, type 1
Parameterization interface
IO-Link® User interface
Rotor position sensor
Absolute encoder, single-turn
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Number of digital logic outputs 24 V DC
2
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
Nominal current
3 A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
IO-Link®, Connection technology
Plug
Spindle pitch
8 mm/U
Spindle type
Ball screw drive
Repetition accuracy
±0.015 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fz
300 N
Max. torque My
1.1 Nm
Torsion moment of inertia It
1700 mm⁴
Moving mass
83.4 g
Drive cover material
Die cast aluminum, painted
Insulation protection class
B
Input switching logic
PNP (positive switching)
Ready status indication
LED
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Guide value for payload, horizontal
2 kg
Max. current consumption
3000 mA
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, data memory required
500 byte
Screw diameter
8 mm
Design
Electromechanical linear axis With integrated drive
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Max. force Fy
150 N
Feed constant
8 mm/U
Static deflection (load at standstill)
0.1 % of axis length
Guide rail material
Steel
Slide material
Die-cast aluminum
Size
32
Working stroke
400 mm
Mounting position
Any
Max. acceleration
5 m/s²
2nd moment of area Iz
45000 mm⁴
Fy with theoretical service life of 100 km (from a guide perspective only)
552 N
My with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Max. feed force Fx
40 N
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Profile material
Wrought aluminum alloy, anodized
Mx with theoretical service life of 100 km (from a guide perspective only)
5 Nm
Product weight
1609 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide carriage material
Steel
Spindle material
Steel

Product condition

Related documents 8083427 Specs