8083386 Festo Electric Actuators

8083386 Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Permissible voltage fluctuations
  +/- 15 %
• Logic input specification
  Based on IEC 61131-2, type 1
• Parameterization interface
  IO-Link® User interface
• Input switching logic
  PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• KC characters
  KC EMC
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Rotor position sensor
  Absolute encoder, single-turn
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Insulation protection class
  B
• Homing
  Fixed stop block positive Fixed stop block, negative
• Position sensing
  Motor encoder For proximity sensor
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, connection type
  Plug
• Guide value for payload, horizontal
  20 kg
• Work range of logic input
  24 V
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
IO-Link®, communication mode
COM3 (230.4 kBd)
Protection class
III
Working stroke
400 mm
Relative air humidity
0 - 90 %
Rotor position sensor measuring principle
Magnetic
Characteristics of logic input
Configurable Not galvanically isolated
Number of digital logic inputs
2
Logic interface, number of poles/wires
8
Nominal current
5.3 A
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data width OUT
2 Byte
IO-Link®, Connection technology
Plug
Spindle pitch
12 mm/U
Spindle type
Ball screw drive
Max. acceleration
5 m/s²
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Display
LED
Switching logic at outputs
PNP (positive switching)
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
Screw diameter
12 mm
Design
Electromechanical linear axis With integrated drive
Additional functions
User interface Integrated end-position sensing
Duty cycle
100%
Repetition accuracy
±0.01 mm
Max. force Fy
600 N
Max. torque Mx
29.1 Nm
My with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Power supply, connection pattern
00995989
Power supply, type of connection
Plug
Guide value for payload, vertical
13 kg
Storage temperature
-20 °C ... 60 °C
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Max. current of digital logic outputs
100 mA
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
IO-Link®, SIO mode support
Yes
IO-Link®, protocol version
Device V 1.1
Stroke reserve
0 mm
Type code
ELGS
Symbol
00997292
2nd moment of area Iy
441000 mm⁴
Max. torque My
31.8 Nm
Torsion moment of inertia It
29800 mm⁴
Product weight
4902 g
Profile material
Wrought aluminum alloy, anodized
Spindle nut material
Steel
Size
60
Guide
Recirculating ball bearing guide
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Fz with theoretical service life of 100 km (from a guide perspective only)
6624 N
Moving mass
525 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide material
Die-cast aluminum
Spindle material
Steel
Mounting position
Any
Motor type
Stepper motor
Max. speed
0.25 m/s
Degree of protection
IP40
Fy with theoretical service life of 100 km (from a guide perspective only)
2208 N
Max. torque Mz
31.8 Nm
Feed constant
12 mm/U
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Slide carriage material
Steel
Drive cover material
Die cast aluminum, painted
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iz
542000 mm⁴
Max. force Fz
1800 N
Mx with theoretical service life of 100 km (from a guide perspective only)
107 Nm
Max. feed force Fx
200 N
Static deflection (load at standstill)
0.1 % of axis length
Material of end caps
Die cast aluminum, painted
Mz with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Cover strip material
High-alloy stainless steel
Guide rail material
Steel

Product condition

Related documents 8083386 Specs