8070095 Festo Vacuum Generators

8070095 Product Details

• Nominal width of Laval nozzle
  2 mm
• Mounting position
  Any
• Design
  Modular
• Switching function
  Window comparator Threshold value comparator
• Display type
  4-character alphanumeric Back-lit LCD
• Width dimension
  36 mm
• Manual override
  Non-detenting Additionally via operating buttons
• Switching element function
  N/C contact N/O contact
• Reverse polarity protection
  for all electrical connections
• Setting options
  Via display and pushbuttons
• Switching position indication
  LCD
• Duty cycle
  100%
• Idle current
  < 70 mA
• Surge resistance
  0.8 kV
• CE marking (see declaration of conformity)
  As per EU EMC directive
• Degree of protection
  IP65
• Max. tightening torque
  0.8 Nm with internal thread 2.5 Nm with through-hole
• Protection against tampering
  PIN code
• Female nozzle material
  POM
• Muffler material
  Wrought aluminum alloy PU foam
Material of pneumatic fitting
Brass, nickel-plated
KC characters
KC EMC
Ejector characteristics
High vacuum Standard
Short-circuit protection
yes
Valve function
Closed
Display range
-0.999 bar ... 0 bar
Setting range hysteresis
-0.9 bar ... 0 bar
Max. suction rate with respect to atmosphere
98 l/min
Inductive protective circuit
Adapted to MZ, MY and ME coils
Voltage drop
≤ 2 V
Contamination level
3
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Ambient temperature
0 °C ... 50 °C
Product weight
825 g
Electrical connection
5-pin Plug
Pneumatic connection 1
QS-1/4
Vacuum connection
QS-12
Material of filter housing
PA-reinforced
Material of screws
Steel
Material of jet nozzle
Wrought aluminum alloy
Material of pins
Steel
Muffler construction type
Open
Integrated function
Ejector pulse valve, electric Vacuum switch
Measured variable
Relative pressure
Switching input to standard
IEC 61131-2
Setting range threshold value
-0.999 bar ... 0 bar
Switching status indication
Optical
Air supply time at nominal operating pressure
0.2 s
Insulation voltage
50 V
Coil characteristics
24 V DC: low-current phase 0.3 W, high-current phase 2.55 W
Temperature of medium
0 °C ... 50 °C
Information on operating and pilot media
Operation with oil lubrication not possible
Certification
RCM compliance mark
Input switching logic
PNP (positive switching)
Reproducibility, switching value FS
0.6 %
Seals material
HNBR NBR
Housing material
Wrought aluminum alloy PA-reinforced
Inspection window material
PA
Material of pin contacts
Brass, gold-plated
Type code
OVEM
Grade of filtration
40 µm
Measuring principle
Piezoresistive
Symbol
00992094
Displayable unit(s)
bar
Operating pressure for max. vacuum
4 bar
Nominal operating pressure
6 bar
DC operating voltage range
20.4 V ... 27.6 V
Residual current
0.1 mA
Switching output
PNP
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Protection class
III
Pressure measuring range
-1 bar ... 0 bar
Pneumatic connection 3
Pneumatic muffler
Material of adjusting screw
Steel
Material of plug housing
Brass, nickel-plated
Operating pressure
2 bar ... 8 bar
Max. vacuum
93 %
Max. output current
100 mA
Overload protection
Available
Relative air humidity
5 - 85 %
Noise level at nominal operating pressure
62 dB(A)
Accuracy in ± % FS
3 %FS
Type of mounting
With through-hole With accessories
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Compressed air filter material
Fabric Sintered steel
Material of keypad
TPE-U

Product condition

Related documents 8070095 Specs