8069725 Festo Pneumatic Components
Part#:8069725
Manufacturer:Festo
Alt. Part#:EMCA-EC-67-S-1TE-PN
Product Lifecycle:Active
Get a quick Quote!
About the product: Integrated Drive EMCA-EC-67-S-1TE-PN Controller operating mode: (* PWM-MOSFET power output stage, * Cascade controller with, * P position controller, * PI speed controller, * Proportional and integral controller for electricity), Configuration support: GS
About the manufacturer: Festo is one of the manufacturers that offers Pneumatic Components that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8069725 Festo price in the box on the right side or send a quick quote.
8069725 Product Details
- KC characters KC EMC
- Configuration support GSDML file
- Rotor position sensor Absolute encoder, single-turn
- Max. rotational speed 3500 1/min
- Characteristics of digital logic outputs Freely configurable in some cases Not galvanically isolated
- Max. negative test pulse on 1 signal 600 µs
- Controller operating mode PWM MOSFET power output stage PI current regulator
- Performance Level (PL) Safe torque off (STO)/category 3, performance level d
- Braking resistor, external 6 Ohm
- Max. current of digital logic outputs 100 mA
- Max. positive test pulse with 0 signal 10000 µs
- Max. number of positioning sets 64
- Media redundancy MRP
- Minimum cycle time 2 ms
- Safety function Safe torque off (STO)
- Display LED
- Diagnostic coverage 90 %
- Motor nominal power 120 W
- SFF safe failure fraction > 90 %
- Rotor position sensor resolution 12 bit
- Certificate issuing authority German Technical Control Board (TÜV) 01/205/5514.00/16 UL E331130
- IP address allocation FCT DCP
- Topologies Star Line
- Rotor position sensor measuring principle Magnetic
- Nominal rotary speed 3100 1/min
- Hardware fault tolerance 1
- Parameterization interface Ethernet
- Motor peak power 158 W
- CE marking (see declaration of conformity) As per EU EMC directive as per EU machinery directive
- Storage temperature -25 °C ... 70 °C
- Permissible axial shaft load 60 N
- Product weight 1900 g
- Logic input specification Based on IEC 61131-2
- Additional functions Conformance class B SNMP
- Baud rate 10/100 Mbit/s (full/half)
- Type code EMCA
- Protective function I²t monitoring Software end position detection
- Safety integrity level (SIL) Safe torque off (STO)/SIL 2
- DC nominal voltage 24 V
- Protocol PROFINET
- Nominal current 6.9 A
- Peak current 10.2 A
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Ambient temperature 0 °C ... 50 °C
- Nominal torque 0.37 Nm
- Number of digital logic outputs 24 V DC 2
- Absolute encoder operating time With external battery: max. 6 months Note: the maximum service life of the battery depends its state of charge, the ambient temperature and ageing effects. Without external battery: 3 days (worst case) up to a maximum of 7 days (best case) Note: Maximum s
- Permissible voltage fluctuations +/- 20 %
- Degree of protection IP54
- Rotor mass moment of inertia 0.175 kgcm²
- Peak torque 0.85 Nm
- PFH 1.0E-9
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Relative air humidity 0 - 95 % Non-condensing
- Note on ambient temperature Above an ambient temperature of 20 °C, the power must be reduced by 1.75% per °C.
- PFD 1.86E-5
- Communication profile FHPP
- Certification RCM compliance mark c UL us - Recognized (OL)
- Permissible radial shaft load 100 N
- Proof test interval 20 y
- Number of digital logic inputs 2
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Work range of logic input 24 V
- Switching logic at outputs PNP (positive switching)
- Characteristics of logic input Galvanically connected to logic potential
- Ethernet, supported protocols TCP/IP
- Input switching logic PNP (positive switching)
- Type of mounting Screwed tightly With through-hole
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8069725 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8069725
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
