8066453 Festo Quarter Turn Actuators
Part#:8066453
Manufacturer:Festo
Alt. Part#:DFPD-N-300-RP-90-RS60-F0710
Product Lifecycle:Active
Get a quick Quote!
About the product: semi-rotary drive DFPD-N-300-RP-90-RS60-F0710 single-acting, rack and pinion design, connection pattern to NAMUR VDI/VDE 3845 for mounting solenoid valves, position sensors and positioners, standard connection to process valve fitting ISO 5211, NPT contro
About the manufacturer: Festo is one of the manufacturers that offers Quarter Turn Actuators that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8066453 Festo price in the box on the right side or send a quick quote.
8066453 Product Details
- Nominal operating pressure 6 bar
- End-position adjusting range at 0° -5 deg ... 5 deg
- Mode of operation Single-acting
- Symbol 00991266
- Type of ignition protection for gas Ex h IIC T4 Gb X
- Explosion prevention and protection Zone 1 (ATEX) Zone 22 (ATEX)
- Storage temperature -20 °C ... 60 °C
- PFD 7.8E-4
- Pneumatic connection 1/4 NPT
- Material of spring Spring steel
- Material of bearing POM
- PFH 1.01E-7
- End-position adjusting range at nominal swivel angle -5 deg ... 5 deg
- Mounting position Any
- Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 2
- ATEX category gas II 2G
- Ambient temperature -20 °C ... 80 °C
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX)
- Shaft connection T22
- Housing material Wrought aluminum alloy, anodized
- Shaft material Steel, nickel-plated
- MTTFd 1126 years
- Swivel angle 90 deg
- Standard connection for valve ISO 5211
- Closing direction Clockwise closing
- Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 1 high demand mode
- Type of (ignition) protection for dust Ex h IIIC T105°C Db X
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
- Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 11 l
- Cover material Die-cast aluminum, coated
- Material of piston Die-cast aluminum
- Operating pressure 2 bar ... 8 bar
- Safety function The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force.
- Flange hole pattern F0710
- Type code DFPD
- ATEX category for dust II 2D
- Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19
- Torque at nominal operating pressure and 0° swivel angle 221 Nm
- Spring return torque at 0° swivel angle 108.4 Nm
- Note on materials RoHS-compliant
- Cam material Steel
- Size of valve actuator 300
- Devices type according to VDMA 66413 Safety device
- Maritime classification See certificate
- Depth shaft connection 24 mm
- Design Gear rack/pinion
- Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
- Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand up to SIL 3 in a redundant architecture
- Explosive ambient temperature -20°C <= Ta <= +80°C
- Information on operating and pilot media Dew point min. 10 °C below the ambient and medium temperature Operation with oil lubrication possible (required for further use)
- Torque at nominal operating pressure and 90° swivel angle 115.3 Nm
- Spring return torque with 90° swivel angle 214.1 Nm
- Product weight 12880 g
- Material of sub-base Wrought aluminum alloy, anodized
- Seals material NBR
- Material of screws High-alloy stainless steel
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 8066453 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
8066453
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
