Nikki Gonzales
Nick Goetz
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

8061203 Festo Pneumatic Components

Festo 8061203 Integrated Drive EMCA-EC-67-S-1TM-EP Controller operating mode: (* PWM-MOSFET power output stage, * Cascade controller with, * P position controller, * PI speed controller, * Proportional and integral controller for electricity), Rotor position sensor: Ab
Festo

Part#:8061203

Manufacturer:Festo

Alt. Part#:EMCA-EC-67-S-1TM-EP

Product Lifecycle:Active

Get a quick Quote!

About the product: Integrated Drive EMCA-EC-67-S-1TM-EP Controller operating mode: (* PWM-MOSFET power output stage, * Cascade controller with, * P position controller, * PI speed controller, * Proportional and integral controller for electricity), Rotor position sensor: Ab

About the manufacturer: Festo is one of the manufacturers that offers Pneumatic Components that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8061203 Festo price in the box on the right side or send a quick quote.

8061203 Product Details

  • Rotor position sensor measuring principle
    Magnetic
  • Safety integrity level (SIL)
    Safe torque off (STO)/SIL 2
  • KC characters
    KC EMC
  • Protective function
    I²t monitoring Software end position detection
  • Diagnostic coverage
    90 %
  • Max. positive test pulse with 0 signal
    10000 µs
  • Protocol
    EtherNet/IP
  • Permissible voltage fluctuations
    +/- 20 %
  • Relative air humidity
    0 - 95 % Non-condensing
  • Permissible axial shaft load
    60 N
  • Display
    LED
  • Max. current of digital logic outputs
    100 mA
  • Nominal current
    6.9 A
  • Peak current
    10.2 A
  • CE marking (see declaration of conformity)
    As per EU EMC directive as per EU machinery directive
  • Type code
    EMCA
  • Rotor position sensor
    Absolute encoder, multi-turn
  • Safety function
    Safe torque off (STO)
  • Max. rotational speed
    3500 1/min
  • Hardware fault tolerance
    1
  • Max. negative test pulse on 1 signal
    600 µs
  • Controller operating mode
    PWM MOSFET power output stage PI current regulator
  • Performance Level (PL)
    Safe torque off (STO)/category 3, performance level d
  • Characteristics of digital logic outputs
    Freely configurable in some cases Not galvanically isolated
  • Motor nominal power
    120 W
  • SFF safe failure fraction
    > 90 %
  • Motor peak power
    158 W
  • Braking resistor, external
    6 Ohm
  • Nominal rotary speed
    3100 1/min
  • DC nominal voltage
    24 V
  • Rotor position sensor resolution
    12 bit
  • Vibration resistance
    Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
  • Ambient temperature
    0 °C ... 50 °C
  • Certification
    RCM compliance mark c UL us - Recognized (OL)
  • Proof test interval
    20 y
  • Communication profile
    FHPP
  • Input switching logic
    PNP (positive switching)
  • Parameterization interface
    Ethernet
  • Max. number of positioning sets
    64
  • Absolute encoder operating time
    With external battery: max. 6 months Note: the maximum service life of the battery depends its state of charge, the ambient temperature and ageing effects. Without external battery: 3 days (worst case) up to a maximum of 7 days (best case) Note: Maximum s
  • Shock resistance
    Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
  • Degree of protection
    IP54
  • Peak torque
    0.85 Nm
  • Permissible radial shaft load
    100 N
  • Product weight
    1925 g
  • Number of digital logic inputs
    2
  • Ethernet, supported protocols
    TCP/IP
  • Certificate issuing authority
    German Technical Control Board (TÜV) 01/205/5514.00/16 UL E331130
  • Storage temperature
    -25 °C ... 70 °C
  • Nominal torque
    0.37 Nm
  • Rotor mass moment of inertia
    0.175 kgcm²
  • PFD
    1.86E-5
  • Work range of logic input
    24 V
  • Logic input specification
    Based on IEC 61131-2
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Note on ambient temperature
    Above an ambient temperature of 20 °C, the power must be reduced by 1.75% per °C.
  • PFH
    1.0E-9
  • Characteristics of logic input
    Galvanically connected to logic potential
  • Type of mounting
    Screwed tightly With through-hole
  • Number of digital logic outputs 24 V DC
    2
  • Switching logic at outputs
    PNP (positive switching)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents 8061203 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

8061203

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo