8036872 Festo Flow Sensors

8036872 Product Details

• Measured variable
  Flow rate Temperature
• Information on operating pressure
  Max. 12 bar at 40°C Max. 6 bar at 100 °C
• Accuracy of temperature in ± °C
  2 °C
• Switching element function
  N/C contact/N/O contact switchable
• Flow characteristic curve, end value
  32 l/min
• Protocol
  IO-Link®
• IO-Link®, profile
  Smart sensor profile
• IO-Link®, service data contents IN
  32 bit volume measurement
• Max. cable length
  20 m for IO-Link® operation 30 m
• Degree of protection
  IP65
• Type code
  SFAW
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Method of measurement
  Flow rate: vortex Temperature: PT1000
• Temperature measuring range end value
  90 °C
• Operating medium
  Liquid media Neutral liquids
• Switching output
  2 x PNP or 2 x NPN switchable
• Max. output current
  100 mA
• Max. load resistance of current output
  500 Ohm
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data width OUT
  0 Byte
DC operating voltage range
18 V ... 30 V
Materials in contact with the media
EPDM (peroxide) PA6T/6I-reinforced
Symbol
00995566
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Flow measuring range start value
1.8 l/min
Operating pressure
0 bar ... 12 bar
Accuracy of flow rate
±2 % FS for flow rate <= 50 % FS ±3 % o.m.v. for flow rate >= 50 %FS
Temperature co-efficient margin in ± %FS/K
Typ. ±0.05% FS/K
Analog output
0 - 10 V 1 - 5 V
Min. load resistance of voltage output
15 kOhm
Overload protection
Available
IO-Link®, port class
A
IO-Link®, process data width IN
5 Byte
IO-Link®, minimum cycle time
5 ms
Mounting position
Any
Displayable unit(s)
US gal °F
Flow measuring range end value
32 l/min
Information on operating and pilot media
Media with a kinematic viscosity = 1.8 mm²/sec. [cSt]. Compatibility of the media with the substances that come into contact with the media must be ensured.
Nominal temperature
23 °C
Switching function
Window comparator Freely programmable
Flow characteristic curve, start value
0 l/min
Short-circuit protection
yes
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, data memory required
500 byte
Electrical connection
5-pin Plug, straight
Housing material
PA-reinforced
Fluid connector
Internal thread G1/2
KC characters
KC EMC
Note on materials
RoHS-compliant
Flow direction
Unidirectional P1 -> P2
Temperature measuring range start value
0 °C
Temperature of medium
0 °C ... 90 °C
Ambient temperature
0 °C ... 50 °C
Repetition accuracy of flow rate value
< ±0.5 % FS for flow rate <= 50 % FS < ±1 % o.m.v. for flow rate >= 50 %FS
Temperature characteristic curve end value
100 °C
Temperature characteristic curve start value
0 °C
IO-Link®, SIO mode support
Yes
IO-Link®, process data content IN
1 bit BDC (temperature monitoring) 2 bit BDC (flow monitoring)
Reverse polarity protection
for all electrical connections
Product weight
400 g
Corrosion resistance class (CRC)
3 - High corrosion stress

Product condition

Related documents 8036872 Specs