8030616 Festo Quarter Turn Actuators

8030616 Product Details

• End-position adjusting range at 0°
  -1 deg ... 9 deg
• Size of valve actuator
  0030
• End-position adjusting range at nominal swivel angle
  81 deg ... 91 deg
• Depth shaft connection
  16.5 mm
• Mode of operation
  Single-acting
• Position sensing
  None
• Operating pressure
  5.6 bar ... 8.4 bar
• ATEX category for dust
  II 2D
• Torque at nominal operating pressure and 50° swivel angle
  15 Nm
• Spring return torque at 0° swivel angle
  20 Nm
• Shaft connection
  T14
• Product weight
  1950 g
• Shaft material
  High-alloy steel
• Swivel angle
  90 deg
• Type code
  DAPS
• Cushioning
  No cushioning
• Closing direction
  Clockwise closing
• Safety integrity level (SIL)
  Up to SIL 2 high demand mode Up to SIL 2 low demand mode
• Explosive ambient temperature
  -20°C <= Ta <= +150°C
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
Torque at nominal operating pressure and 0° swivel angle
30 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
1.19 l
Cover material
Wrought aluminum alloy
Material number for shaft
1.4305
Flange hole pattern
F05 F07
Standard connection for valve
ISO 5211
Design
Scotch yoke system
Connection pressure for spring force
5.6 bar
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
3 - High corrosion stress
Torque at nominal operating pressure and 90° swivel angle
20 Nm
Spring return torque with 50° swivel angle
15 Nm
Pneumatic connection
G1/8
Material of screws
High-alloy steel
Mounting position
Any
Symbol
00991266
ATEX category gas
II 2G
Ambient temperature
-20 °C ... 150 °C
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Note about the torque
The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Seals material
FPM PTFE-reinforced
Information on the end-position adjusting range
One end position optionally adjustable
Valve connection conforms to standard
VDI/VDE 3845 (NAMUR)
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Spring return torque with 90° swivel angle
30 Nm
Spring force
4
Housing material
Wrought aluminum alloy

Product condition

Related documents 8030616 Specs