8001205 Festo Pressure Sensors

8001205 Product Details

• Type code
  SPAU
• KC characters
  KC EMC
• Symbol
  00995410
• Measured variable
  Relative pressure
• Pressure measuring range initial value
  0 bar
• Ambient temperature
  0 °C ... 50 °C
• Repetition accuracy in ± %FS
  0.3 %FS
• Switching function
  Freely programmable
• Rise time
  3 ms
• IO-Link®, function classes
  Binary data channel (BDC) Teach channel
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data content IN
  14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
• Mounting position
  Any
• Reverse polarity protection
  for all electrical connections
• Setting options
  IO-Link® Via display and pushbuttons
• Setting range hysteresis
  0 % ... 90 %
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Accuracy in ± % FS
  1.5 %FS
• Electrical connection 1, connection type
  Plug
• Information on operating and pilot media
  Operation with oil lubrication possible
Max. output current
100 mA
Max. load resistance of current output
500 Ohm
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data width OUT
0 Byte
IO-Link®, minimum cycle time
3 ms
Pneumatic connection
1/8 NPT
Setting range threshold value
0 % ... 100 %
Electrical connection for input 1, connection pattern
00995386
Note on materials
RoHS-compliant
Pressure measuring range end value
10 bar
Switching element function
N/C contact/N/O contact switchable
Analog output
0 - 10 V 1 - 5 V
Short-circuit protection
yes
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, process data width IN
2 Byte
IO-Link®, data memory required
500 byte
DC operating voltage range
20 V ... 30 V
Display type
Illuminated LCD
Degree of protection
IP65 IP67
Certification
RCM compliance mark c UL us - Listed (OL)
Max. overload pressure
15 bar
Temperature of medium
0 °C ... 50 °C
Temperature co-efficient in ± %FS/K
0.05 %FS/K
Min. load resistance of voltage output
10 kOhm
IO-Link®, profile
Smart sensor profile
IO-Link®, port class
A
Type of mounting
With thread
Product weight
80 g
Displayable unit(s)
MPa psi
Protection against tampering
IO-Link® PIN code
Electrical connection 1, connection technology
M12x1 A-coded as per EN 61076-2-101
Electrical connection 1, number of pins/wires
4
Method of measurement
Piezoresistive pressure sensor
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
ADC resolution
12 bit
Switching output
2 x PNP or 2 x NPN switchable
Protocol
IO-Link®

Product condition

Related documents 8001205 Specs