5255528 Festo Servo Motors
Part#:5255528
Manufacturer:Festo
Alt. Part#:EMMT-AS-100-S-HS-RSB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-100-S-HS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, St
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255528 Festo price in the box on the right side or send a quick quote.
5255528 Product Details
- Brake closing time ≤ 20 ms
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. winding temperature 155 °C
- Brake coil resistance 32 Ohm
- Brake stopping current 0.54 A
- Brake power consumption 18 W
- Rotor position sensor resolution 19 bit
- Peak current 13.7 A
- Electrical connection 1, connection type Hybrid plug
- Electrical connection for input 1, connection pattern 00995913
- Mounting position Any
- Measuring flange 300 x 300 x 20 mm, steel
- Electrical connection 1, number of pins/wires 15
- Max. installation height 4000 m
- Number of pole pairs 5
- Electric time constant 14.5 ms
- Standstill torque constant 1.67 Nm/A
- Thermal resistance 0.6 K/W
- Type code EMMT-AS
- Nominal rotary speed 2700 1/min
- Nominal operating voltage DC 565 V
- Winding inductance phase-phase 32.4 mH
- Rating class according to EN 60034-1 S1
- Relative air humidity 0 - 90 %
- Total output inertia moment 4.04 kgcm²
- Peak torque 13.7 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Rotor position encoder for DC operating voltage 5 V
- Brake separation time ≤ 80 ms
- Winding longitudinal inductivity Ld (phase) 17.8 mH
- Rotor position encoder system accuracy angle measurement -65 arcsec ... 65 arcsec
- Rotor position sensor interface EnDat® 22
- Max. rotational speed 3970 1/min
- Brake DC operating voltage 24 V
- Motor nominal power 1450 W
- Type of winding switch Star inside
- Thermal class according to EN 60034-1 F
- Permissible axial shaft load 200 N
- Product weight 6700 g
- Conforms to standard IEC 60034
- Detent torque < 1.0% of peak torque
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Balancing quality G 2.5
- Brake airflow 0.54 A
- Brake coil inductivity 900 mH
- Brake current consumption 0.75 A
- Max. mechanical speed 13000 1/min
- DC brake response delay ≤ 4 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 74 min
- Rotor position sensor measuring principle Inductive
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Motor constants 1.45 Nm/A
- Voltage constant, phase-to-phase 101 mVmin
- Storage temperature -20 °C ... 70 °C
- Degree of protection IP40
- Nominal torque 5.1 Nm
- Permissible radial shaft load 1110 N
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Electrical connection 1, connection technology M23x1
- Rotor position sensor for manufacturer designation ECI 1319
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Contamination level 2
- Certificate issuing authority UL E342973
- Max. brake no-load speed 10000 1/min
- Storage lifetime, under nominal conditions 20000 h
- Max. brake friction work 12000 J
- Cross inductivity Lq (phase) 24.3 mH
- Rotor position encoder for absolutely detectable revolutions 1
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor Absolute encoder, single-turn
- Continuous stall current 4.4 A
- Phase-phase winding resistance 3.35 Ohm
- Motor nominal current 3.5 A
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Certification RCM compliance mark c UL us - Recognized (OL)
- Brake mass moment of inertia 0.74 kgcm²
- Stall torque 6.3 Nm
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature -15 °C ... 40 °C
- Brake holding torque 11 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Interface code, motor out 100A
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5255528 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5255528
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
