5255440 Festo Servo Motors
Part#:5255440
Manufacturer:Festo
Alt. Part#:EMMT-AS-80-M-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-80-M-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255440 Festo price in the box on the right side or send a quick quote.
5255440 Product Details
- Electrical connection 1, connection technology M23x1
- Rotor position sensor for manufacturer designation EQI 1131
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Electrical connection 1, number of pins/wires 15
- Max. installation height 4000 m
- Brake stopping current 0.37 A
- Electrical connection for input 1, connection pattern 00995913
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Measuring flange 250 x 250 x 15 mm, steel
- Balancing quality G 2.5
- Max. mechanical speed 14000 1/min
- Brake coil resistance 48 Ohm
- Brake separation time ≤ 55 ms
- Rotor position encoder for absolutely detectable revolutions 4096
- Type code EMMT-AS
- Rotor position sensor interface EnDat® 22
- Nominal rotary speed 3000 1/min
- Nominal operating voltage DC 565 V
- Motor nominal power 690 W
- Winding inductance phase-phase 31.8 mH
- Ambient temperature -15 °C ... 40 °C
- Brake mass moment of inertia 0.249 kgcm²
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Electrical connection 1, connection type Hybrid plug
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Contamination level 2
- Motor type as per EN 60034-7 IM B5 IM V3
- Brake airflow 0.37 A
- Brake coil inductivity 1000 mH
- Storage lifetime, under nominal conditions 20000 h
- Number of pole pairs 5
- Winding longitudinal inductivity Ld (phase) 19.4 mH
- Thermal resistance 0.78 K/W
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake power consumption 12 W
- Rotor position sensor resolution 19 bit
- Type of winding switch Star inside
- Storage temperature -20 °C ... 70 °C
- Brake holding torque 4.5 Nm
- Nominal torque 2.2 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Conforms to standard IEC 60034
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Rotor position encoder for DC operating voltage 5 V
- Max. brake friction work 8200 J
- Cross inductivity Lq (phase) 23.8 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position encoder for positional values per revolution 524288
- Continuous stall current 2.6 A
- Phase-phase winding resistance 7.43 Ohm
- Voltage constant, phase-to-phase 70.7 mVmin
- Relative air humidity 0 - 90 %
- Thermal class according to EN 60034-1 F
- Stall torque 2.6 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Detent torque < 1.0% of peak torque
- Mounting position Any
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Max. winding temperature 155 °C
- Max. brake no-load speed 10000 1/min
- Brake current consumption 0.5 A
- Brake closing time ≤ 15 ms
- Electric time constant 6.4 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 45 min
- Max. rotational speed 5650 1/min
- Rating class according to EN 60034-1 S1
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Certification RCM compliance mark c UL us - Recognized (OL)
- Total output inertia moment 2.07 kgcm²
- Permissible axial shaft load 120 N
- Product weight 3360 g
- Interface code, motor out 80P
- DC brake response delay ≤ 3 ms
- Standstill torque constant 1.17 Nm/A
- Rotor position sensor Absolute encoder, multi-turn
- Rotor position sensor measuring principle Inductive
- Brake DC operating voltage 24 V
- Motor constants 1 Nm/A
- Motor nominal current 2.2 A
- Peak current 9 A
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Degree of protection IP40
- Peak torque 6.4 Nm
- Permissible radial shaft load 620 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5255440 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5255440
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
