5255439 Festo Servo Motors
Part#:5255439
Manufacturer:Festo
Alt. Part#:EMMT-AS-80-M-HS-RSB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-80-M-HS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255439 Festo price in the box on the right side or send a quick quote.
5255439 Product Details
- Electrical connection 1, connection type Hybrid plug
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Measuring flange 250 x 250 x 15 mm, steel
- Electrical connection 1, number of pins/wires 15
- Max. winding temperature 155 °C
- Number of pole pairs 5
- Max. brake friction work 8200 J
- Winding longitudinal inductivity Ld (phase) 19.4 mH
- Thermal resistance 0.78 K/W
- Rotor position sensor measuring principle Inductive
- Nominal rotary speed 3000 1/min
- Detent torque < 1.0% of peak torque
- Rotor position sensor for manufacturer designation ECI 1118
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Balancing quality G 2.5
- Max. brake no-load speed 10000 1/min
- Brake current consumption 0.5 A
- Cross inductivity Lq (phase) 23.8 mH
- Rotor position encoder for absolutely detectable revolutions 1
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Brake DC operating voltage 24 V
- Motor constants 1 Nm/A
- Rotor position sensor resolution 18 bit
- Peak current 9 A
- Voltage constant, phase-to-phase 70.7 mVmin
- Thermal class according to EN 60034-1 F
- Brake mass moment of inertia 0.249 kgcm²
- MTTFd, subcomponent 380 years, rotor position sensor
- Conforms to standard IEC 60034
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Brake airflow 0.37 A
- Brake coil inductivity 1000 mH
- Brake stopping current 0.37 A
- Brake separation time ≤ 55 ms
- Standstill torque constant 1.17 Nm/A
- Rotor position encoder for positional values per revolution 262144
- Continuous stall current 2.6 A
- Motor nominal current 2.2 A
- Rating class according to EN 60034-1 S1
- Degree of protection IP40
- Certification RCM compliance mark c UL us - Recognized (OL)
- Nominal torque 2.2 Nm
- Product weight 3360 g
- Electrical connection for input 1, connection pattern 00995913
- Contamination level 2
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. installation height 4000 m
- Brake coil resistance 48 Ohm
- Storage lifetime, under nominal conditions 20000 h
- DC brake response delay ≤ 3 ms
- Electric time constant 6.4 ms
- Type code EMMT-AS
- Rotor position sensor interface EnDat® 22
- Max. rotational speed 5650 1/min
- Motor nominal power 690 W
- Phase-phase winding resistance 7.43 Ohm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Total output inertia moment 2.07 kgcm²
- Peak torque 6.4 Nm
- Permissible radial shaft load 620 N
- Electrical connection 1, connection technology M23x1
- Mounting position Any
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Rotor position encoder for DC operating voltage 5 V
- Max. mechanical speed 14000 1/min
- Brake closing time ≤ 15 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 45 min
- Rotor position sensor Absolute encoder, single-turn
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake power consumption 12 W
- Winding inductance phase-phase 31.8 mH
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Storage temperature -20 °C ... 70 °C
- Stall torque 2.6 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Interface code, motor out 80P
- Nominal operating voltage DC 565 V
- Type of winding switch Star inside
- Relative air humidity 0 - 90 %
- Ambient temperature -15 °C ... 40 °C
- Brake holding torque 4.5 Nm
- Permissible axial shaft load 120 N
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5255439 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5255439
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
