5255432 Festo Servo Motors
Part#:5255432
Manufacturer:Festo
Alt. Part#:EMMT-AS-80-S-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-80-S-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255432 Festo price in the box on the right side or send a quick quote.
5255432 Product Details
- Electrical connection 1, connection technology M23x1
- Detent torque < 1.0% of peak torque
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Balancing quality G 2.5
- Brake airflow 0.37 A
- Brake current consumption 0.5 A
- Brake separation time ≤ 55 ms
- Winding longitudinal inductivity Ld (phase) 25 mH
- Electrical connection for input 1, connection pattern 00995913
- Mounting position Any
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. brake no-load speed 10000 1/min
- Brake stopping current 0.37 A
- Max. brake friction work 8200 J
- Electric time constant 4.8 ms
- Thermal time constant 42 min
- Rotor position sensor Absolute encoder, multi-turn
- Continuous stall current 2 A
- Nominal operating voltage DC 565 V
- Winding inductance phase-phase 39.8 mH
- Relative air humidity 0 - 90 %
- Brake mass moment of inertia 0.249 kgcm²
- Peak torque 2.8 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Contamination level 2
- Max. winding temperature 155 °C
- Brake coil inductivity 1000 mH
- Number of pole pairs 5
- Cross inductivity Lq (phase) 29.8 mH
- Type code EMMT-AS
- Rotor position sensor interface EnDat® 22
- Brake DC operating voltage 24 V
- Motor constants 0.74 Nm/A
- Phase-phase winding resistance 12.4 Ohm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP40
- Certification RCM compliance mark c UL us - Recognized (OL)
- Stall torque 1.46 Nm
- Conforms to standard IEC 60034
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Measuring flange 250 x 250 x 15 mm, steel
- Electrical connection 1, number of pins/wires 15
- Max. installation height 4000 m
- Max. mechanical speed 14000 1/min
- Brake closing time ≤ 15 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for absolutely detectable revolutions 4096
- Thermal resistance 0.95 K/W
- Nominal rotary speed 3000 1/min
- Max. rotational speed 7440 1/min
- Rotor position sensor resolution 19 bit
- Type of winding switch Star inside
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature -15 °C ... 40 °C
- Total output inertia moment 1.64 kgcm²
- Permissible axial shaft load 120 N
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Electrical connection 1, connection type Hybrid plug
- Rotor position sensor for manufacturer designation EQI 1131
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Rotor position encoder for DC operating voltage 5 V
- Brake coil resistance 48 Ohm
- Storage lifetime, under nominal conditions 20000 h
- DC brake response delay ≤ 3 ms
- Standstill torque constant 0.89 Nm/A
- Rotor position sensor measuring principle Inductive
- Motor nominal power 408 W
- Voltage constant, phase-to-phase 53.6 mVmin
- Rating class according to EN 60034-1 S1
- Thermal class according to EN 60034-1 F
- Nominal torque 1.3 Nm
- Permissible radial shaft load 620 N
- Product weight 2720 g
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position encoder for positional values per revolution 524288
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake power consumption 12 W
- Motor nominal current 1.76 A
- Peak current 5.4 A
- Storage temperature -20 °C ... 70 °C
- Brake holding torque 4.5 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Interface code, motor out 80P
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5255432 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5255432
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
