5242214 Festo Servo Motors
Part#:5242214
Manufacturer:Festo
Alt. Part#:EMMT-AS-60-L-LS-RSB
Product Lifecycle:Active
Get a quick Quote!
About the product: servo motor EMMT-AS-60-L-LS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5242214 Festo price in the box on the right side or send a quick quote.
5242214 Product Details
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Balancing quality G 2.5
- Brake airflow 0.33 A
- Brake current consumption 0.46 A
- Storage lifetime, under nominal conditions 20000 h
- Winding longitudinal inductivity Ld (phase) 4.2 mH
- Thermal resistance 1.2 K/W
- Thermal time constant 44 min
- Rotor position sensor measuring principle Inductive
- Nominal rotary speed 3000 1/min
- Motor nominal current 3 A
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Thermal class according to EN 60034-1 F
- Electrical connection for input 1, connection pattern 00995913
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Contamination level 2
- Max. winding temperature 155 °C
- Electrical connection 1, number of pins/wires 15
- Number of pole pairs 5
- DC brake response delay ≤ 2 ms
- Electric time constant 3 ms
- Standstill torque constant 0.52 Nm/A
- Rotor position sensor Absolute encoder, single-turn
- Continuous stall current 3.5 A
- Motor constants 0.44 Nm/A
- Rotor position sensor resolution 18 bit
- Winding inductance phase-phase 7 mH
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Rating class according to EN 60034-1 S1
- Certification RCM compliance mark c UL us - Recognized (OL)
- Stall torque 1.56 Nm
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Electrical connection 1, connection type Hybrid plug
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. brake no-load speed 10000 1/min
- Max. mechanical speed 16000 1/min
- Brake closing time 10 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for positional values per revolution 262144
- Max. rotational speed 6800 1/min
- Brake DC operating voltage 24 V
- Motor nominal power 410 W
- Peak current 18.3 A
- Voltage constant, phase-to-phase 31.2 mVmin
- Degree of protection IP40
- Nominal torque 1.3 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Electrical connection 1, connection technology M23x1
- Mounting position Any
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Max. installation height 4000 m
- Brake coil inductivity 700 mH
- Brake stopping current 0.33 A
- Cross inductivity Lq (phase) 5 mH
- Rotor position encoder for absolutely detectable revolutions 1
- Type code EMMT-AS
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake power consumption 11 W
- Phase-phase winding resistance 2.68 Ohm
- Relative air humidity 0 - 90 %
- Ambient temperature -15 °C ... 40 °C
- Total output inertia moment 0.49 kgcm²
- MTTFd, subcomponent 380 years, rotor position sensor
- Interface code, motor out 60P
- Detent torque < 1.0% of peak torque
- Rotor position sensor for manufacturer designation ECI 1118
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Measuring flange 250 x 250 x 15 mm, steel
- Rotor position encoder for DC operating voltage 5 V
- Brake coil resistance 52.4 Ohm
- Brake separation time ≤ 35 ms
- Max. brake friction work 5600 J
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position sensor interface EnDat® 22
- Nominal operating voltage DC 325 V
- Type of winding switch Star inside
- Storage temperature -20 °C ... 70 °C
- Brake holding torque 2.5 Nm
- Brake mass moment of inertia 0.074 kgcm²
- Permissible axial shaft load 70 N
- Product weight 2230 g
- Conforms to standard IEC 60034
- Peak torque 5.6 Nm
- Permissible radial shaft load 350 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Related documents 5242214 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
5242214
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
